Mitchell information and Alldata both prublish that the torque values for this engine are 65-75 ft/lbs. Be sure you use the correct tightening sequence, This is important. In this application the sequnce is as follows: (HOPE THIS SHOWS UP RIGHT AS I TYPED IT.) < 9 5 1 3 7
22 ft. lbs.
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.
14-20 ft. lbs.
15-20 ft lbs
what is the torque on 2.2 rocker arms and in what order
The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound intervals.
For the 1989 Chevy S-10 with the 2.5 liter engine, the torque setting for the rocker arm bolt is 22 ft. lbs. The torque setting for the rocker arm cover is 75-inch lbs.
They are not adjustable.
What are the torque specs for a 1996 Chevy cavalier 2.2l
There are no torque specs for a 350 Chevy. Follow the valve adjustment instructions in any repair manual for any small block Chevy.
No, head bolt torque is much higher than rocker arms.
Why are ets and engine light on in 98 Chevy cavalier
valve or rocker clearence for a 1995 chevy 2.2
i need to know what the torque specs are on the rocker arms for a 97 Chevy lumina, 3.1L v6
Rocker arms are set to a specific preload or backlash on v8 Chevies. There is no torque specification.
The correct torque for the rocker arm bolt is 14 N·m (124 lb in) plus 30 degrees.
22 ft lbs
The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.
i need the head bolt torque on a 04 chevi cavallier engine 2.2 DOHC
The 98 Cavalier 2.4 is a NON interference engine.
The 99 milllin
20 foot pounds
20-25 foot pounds.