On the 3 cylinder model the firing order is 1-3-2
Knowing the firing order can help a person troubleshoot engine problems. The firing order for a 1991 Geo Metro is 1-3-4-2.
yes, if it's a 3 cylinder Mr Geo Metro yes, if it's a 3 cylinder Mr Geo Metro
Should be 1-3-2-4
The firing order is 1-3-4-2 #1 is located closest to the drive belt and so on to 2 3 & 4 Or: http://autorepair.about.com/od/enginefiringorders1/
Engine Should Be A 3 Cylinder 1.0 With The Firing Order Stamped In The Manifold. 1-3-2 Counter Clockwise Rotation On Distributor.
On the three cylinder, it's 1-3-2. Distributor rotates counter-clockwise. On the 1.3 liter four cylinder, it's 1-3-4-2. Same rotation on the dist.
If the engines are the same size then yes (ie) 3 cylinder 1.0L to 3 cylinder 1.0L.
The Geo Metro was the only Geo to have a 3cylinder engine.
The crank bolt is right thread on a 96 geo metro. bob.
1,3,2,4 that is the firing order.
Yes 1litre 3 cylinder.
the rotation is counter clock wise and the firing order is 1-3-2.
To the best of my knowledge there is no adjustment for valves on the 3 cylinder
Go to Google.com and type in the words "1990 Geo Tracker firing order" and it will get you to a site that will tell you.
Number one cylinder is the one closest to the passenger side fender.
Can you swap a 93 Geo metro manual transmition with a 95 Geo Metro
Probably computer controlled and not adjustable
Sure will. Any Metro motor from 1989-1997 will fit in it assuming that they are of equal size (ie) 3 cylinder 1.0L to 3 cylinder 1.0L. You can put a bigger engine like a 1.3L from a Swift in it but it requires a bit of tweaking.
Inside of the gas tank.
Under your master cylinder against the firewall.
About 39-44 MPG