60 to 66 psi.
The fuel lines around the filter; you will need an adapter.
.043
.43L. 1000ml=1L
4L60/E l
43L of 18-k gold
Yes it will bolt right up to it.
There is one before and one after the catalytic converter.
There is no adjustment required, but you can clean it with a carb cleaner.
Use an exhaust made for an LT1 engine the blocks are identical it is the insides that is different. Will bolt right on.
first check to see if your getting voltage to your fuel pump. go to the connector at the rear of the truck. check voltage. should have 12 volts. if you do have 12 volts your pump has gone bad. this happens some times. if you don`t have voltage find your fuel pump relay. (right side kick panel) see if it comes on. on some models the relay is built into the computer box. if it is in the computer box the computer box needs to be replaced. also check to see if your fuel pump fuze is blown.
Don't know what year you have but some sensors are temperature sensitive and you should run a 195 degree thermostat.
It should be on the front of the intake manifold directly above and behind the water pump.