The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.
what is the torque on front wheel bearings for 1998 honda accord
for a buick lacross 2006
the torque setting for the the main bearings of the Toyota 2c engine is 103 Nm. The rid bearing caps are 59 Nm
citroen saxo 1.4. what is the rear brake hub torque setting?
1300 citi golf cam shaft torque settings
What is the mains and big end bearings torque setting for uno 1100 engine
Rear wheel bearing nut tork setting
Need the torque settings for ford ranger 2.5tdu big end bearing, please
290 nm front wheel bearing 1.7 puma
What is the big end torque setting for a fiesta st150
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
Hub and bearing assembly and tighten the bolts to 61-78 ft. lbs. (83-107 Nm)
torque for the rod bearing 2000 dodge
just put it on finger tight, if it breaks down then get a real car.
192 ft-lbs according to a National Bearing publication. The nut is recommended to be changed with the bearing (dealer only part).