Want this question answered?
That's Ohm's law. Volts = Current (or Amps) * Resistance.http://en.wikipedia.org/wiki/Ohms_law
Just use Ohm's Law: V=IR (voltage = current x resistance; using units: volts = amperes x ohms).
Ohm's Law is that Voltage Drop = Current x Resistance. So Current = Voltage Drop/Resistance. In this case Current = 1.5/1000 amps, or 1.5 milliamps
That depends on what units you use as input. If you put in current in Amps and Resistance in Ohms you will get voltage in Volts.AnswerCurrent is measured in amperes. Resistance is measured in ohms, which is a special name given to a volt per ampere. Multiply amperes by (volts per ohm), and you are left with volts.
Ohm's law states that you could calculate the current (Amp), resistance (Ohm), or voltage (Volt) as long as you know the other two. Watts is not part of this law. Therefore, your question does not give enough information.
voltage (volts) current (amps) resistance (ohms)
12 volts.
Current symbol I =voltage/resesistance I=V/R for direct current (dc) and for a resistive load in alternating current (ac)
16 volts
The resistance of the circuit will be 46 ohms
Ohm's Law: Resistance = voltage / current, so 12 / 3 = 4 ohms.
Power, in 'watts'.
Volts is the unit measurement for voltage Current is amperes or amps for short Resistance is ohms
Volts time amps equals watts so watts divided by volts equal amps.
Watts = current x volts, so you have to multiply Kw value by 1000 to get watts, then divide by the applied voltage. examples. 2Kw kettle (U.S) current = 2 x1000 divided by 120, or 16.7 amps 2Kw kettle (UK) current = 2 x1000 divided by 240 or 8.35 amps 100 watt car amplifier current = 100 divided by 12 volts = 8.5amps
The voltage of a circuit with a resistance of 250 ohms and a current of 0.95 amps is 237.5 volts. Ohms's law: Voltage = Current times Resistance
No. Current is voltage divided by resistance.i.e. V=IR, which means I=V/R