Want this question answered?
14mm
A 3/8" Allen socket or wrench will work.
7mm hex socket
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
use an Allen wrench not a socket or open or box wrench.
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
You need a 3/8" allan key or hex socket - not a torx
Snap-on socket # SLEPL 200
a ratchet, 3/8" socket (for the power cable), and either 1/2" or 5/8" socket for the 2 bolts that hold the starter in place.
You need an 8mm hex socket and a 12mm socket. Remove the belt 14mm socket on the tensioner...Then remove the 8mm and 12 mmm bolts and it comes off
It takes a 12 point 12 mm socket