0
What is the small hole in the bottom of the water pump Why is it not plugged or is it supposed to be on a 99 sububran 5.7L?
Wiki User
∙ 16y ago
That hole is called a "weep hole". When the water pump goes bad, water will leak out of it. If you plug it, you won't know when the pump goes bad.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the fuel rail pressure sensor on a 2000 ford contour?
It is located on the end of the fuel rail. It is held on by two small bolts. It will have a small wire harness plugged into it, and a vacuum line plugged onto the bottom of it. It is only used on returnless type fuel systems of the Contour.
Why is there condensation in the distributor.?
well there is water vapor in it Some distributors have a small opening in the bottom with a screen for ventilation but the screen becomes plugged and then condensation builds up.
How do you drain the water from the inside of the door of a 2000 Mitsubishi Eclipse?
There SHOULD be a weep-hole at the bottom of the door. If the door has filled with debris it could have plugged the hole causing a buildup of storm water. Check the bottom of the door for one or more small holes and stick something small (like a small gauge piece of wire) into the hole and make sure it is clear.
What is a small object supposed to provide magical protection?
A talisman is a small object supposed to provide magical protection.
Why do cold water leaks inside my 1979 el camino car when ac is on?
the drain hose on the bottom of the ac/heater core box is plugged from under the hood on the right side (pass) look for a small hose/nipple on the bottom of the box you can try to squeeze it or pull it off and clean it out
Are morphsuits supposed to be tight on you?
ya they are but if there to tight its small
When you write H2O is it supposed to be a small 2?
yes
How are women supposed to wear wedding rings?
To small
What do Chan supposed to mean?
It baby talk or called small.
Where is the dpfe sensor located on a 2001 Mazda tribute?
The DPFE sensor is located on the bulkhead slightly off to the right (when looking rearward into the engine bay. There are two small diameter vacuum hoses plugged into it at the bottom and a wiring harness plugged in halfway up. At the top there is what looks like a large bottletop (it's just a cap). Mazda UK have just supplied one to me for £27 +VAT. Hope this helps.
How do you remove a plugged ball from barrel?
Drill a small hole in the ball. Take a back out screw driver and pull it out.
Is it better to have a small or large hearing number?
Small bacause if you have large you could hear things you are not supposed to
