Possibly a hole in the exhaust
are there 2 fuel pumps on a 1984 chevy citation
On a 1982 Chevy Citation the fuel pump is mounted on the lower engine block.
Yes, the exhaust manifold on a 99 Chevy S10 2.2 will need to be be removed during the blown head gasket repair.
OK, why did you put that as a question?
What is the firinf order for an 83 citation
muffler or exhaust could be damaged....if it has aftermarket exhaust it will sound different since it is not a V8.
Check and clean the MAF sensor.
Sounds like clogged fuel injectors or fuel filter.
Some cars that are similar to the Chevy Citation include the Buick Skylark and the Pontiac Phoenix. You can get more information about these vehicles at websites such as Edmunds.
that year had the jet engine option
Follow the path from the exhaust port on the head. That will show you which is the exhaust rocker, which leads to the exhaust pushrod, which leads to the exhaust tappet.
You will need to remove the exhaust manifold retaining bolts in your 1993 Chevy Astro. Remove the exhaust manifold. Remove the exhaust manifold gasket and clean the surface. Reverse the process to install the new exhaust manifold gasket.
Exhaust manifold torque on 5.7 L Chevy is 25 ft/lbs using anti-seize lubricant.
Exhaust leak at Exhaust manifold to head gasket or oring at exhaust manifold pipe.
The exhaust valves are smaller and lead to the exhaust manifold.
its a chev try changing fuel and air filters
I experienced poor acceleration in my '95 Chevy blazer, which eventually became so severe that when accelerating, the engine nearly stalled.It turned out that my catalytic converter was disintegrating, and choking off the exhaust so severely that the backpressure was causing engine retardation. I took the vehicle to a muffler shop, where they performed a backpressure test on the exhaust to diagnose the problem. After replacing the catalytic converter, the problem was corrected.
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
400 Chevy engine back firiung exhaust carburtor
It is screewed into the exhaust pipe/pipes close to where the exhaust bolts to the engine.
No it will not work.
in the exhaust system