Try pushing the hazzard button in really quick and fast and spray some elctronic spray cleaner (CRC Autozone) in the switch until the hazzards start working This should take care of non working hazzard and turn signal issues. I am assuming the the arm is not physically broken. This worked on a 1998 Lincoln Continental
Chuck
Pull steering wheel, remove steering plate to access turn signal switch. There are two swings as you look down at switch that should be broken. Your Cam spring is broken. best to replace turn signal switch
The turn signal switch is quite easy to remove and replace. The turn signal switch simply plugs in and plugs out.
How do I install a turn signal switch for a Chevy 2000 Impala? WHere is the old part that I need to replace?
The 1998 Lincoln Continental turn signal relay switch can be found beneath the drivers side dashboard. The turn signal relay switch will be above the accelerator pedal.
you can find it in your truck's manual. you should get directions inside on how to replace it.
When I use the signal it makes lot of noise
Pulling the turn signal switch toward you should switch the lights to the low beams. If that doesn't work, you may have to replace the switch, which means replacing the entire turn signal stalk.
i have a 96 Town car and the high/low beam switch is on turn signal. push signal switch forward for high, back for low.
The turn signal switch has a cancel tab molded on it, when this tab is broken off the switch stops canceling the signal. To repair it it will require the turn signal switch be replaced.
replace turn signal kit on 1964 impala
The 2003 Chevrolet Silverado turn signal switch is located below the dashboard, on the drivers side of the passenger compartment. The turn signal switch simply plugs in and out.
turn signal switch is the hazard button! Pull out hazard button and replace it! good luck!