most any 1963 and up small or big block bellhousing will bolt up.
No
It's usually 3/8-16 for the bell housing and 7/16-14 for the tailshaft mount.
The Cat 3208 is an "SAE #2" size. Refer to your transmissions SAE size.
The bell housing bolts are 3/8-16.
Same as small block. 3/8's inch, NC, (16 threads per inch) and I would use 2 and a half inch long, with lock washers. The head of these bolts will need a 9/16ths inch wrench.
You are probably needing a #12 external-torx.
15mm and 13mm for starter bolts
The bolts that go from bell housing to block on a 5.7 (350 c.i.d.) are 3/8 bolts. standard thread with a 9/16 head. The bolts should be no shorter than 1 inch and no longer than 1 1/4 inch.
what size rims are on a 1992 chevy 1500 w/t truck
chevy what? need engine size
18MM Socket
its not going to be the engine you have to worry about it is the clutch and flywheel check the size of the chaft and count the teeth then go to a parts store and pull a clutch for that motor or any Chevy 4x4 truck count the splines measure the size and measure the pilot shaft diameter.