low pressure line
Freon is added through the ac low pressure port. The port is located on the aluminum pipe on the ac line.
Add coolant to the overflow tank in the engine compartment near the fuse box on the right side of the vehicle near the firewall.
To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.
Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.
How much antifreeze does a 1998 chevy mabilu ls take
how to add coolant to 1991 lumina?
You should never add full strength coolant to any vehicle. Always dilute it with distilled water
Check the coolant reservoir in the engine compartment. There are marks to assist you with proper level. If it's empty you need to add coolant ASAP.
The overflow resavour is where you add coolant
add water or anti-freeze coolant
Replace the coolant temp sensor.
You add coolant to a C240 at the radiator overflow tank. This allows the radiator to suck in coolant as needed when hot.