answersLogoWhite

0


Best Answer

Under the plastic engine cover midway along the rail carrying coolant - opened with Allan key

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the location of an Audi a4 coolant bleed screw?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What coolant Audi?

Audi uses PINK in color coolant... it has to be G12 get it from Audi or VW dealer shop. Don't get fooled by those universal coolants.. get manf. recommended. I got 1 gal pink color coolant G12 from California Audi dealer $22.00 + tax. it is a concentrated coolant so if you plan to mixed 50% you will get 2 gallons.


How do you bleed a hydraulic clutch on an Audi 5000S?

The best way to bleed the system is to make sure the pedal is up off the floor, and the resevior is full, remove the slave from the trans, open the bleeder screw push the rod into the slave, close the screw, let the rod move back out slowley,,, repeat this until the rod is feels solid. Now open the bleeder screw and slide the slave into the trans all the way, then close bleeder screw and install the pin. top of fluid....


How do you bleed a hydraulic clutch on an Audi 4000?

The rubber gasket failure.


How do you bleed the cooling system on an Audi 100?

This should be fairly easy to do. First fill the coolant to the max mark on the tank. Then see if it almost automatically loses some coolant (it might almost burp its self) if it doesn't squeeze the big top tube right next to the coolant tank this will send some air back into the tank. Second uncover the bleeder valve for the system which should be hidden under a plastic cover near the windshield at the back of the engine compartment (taking off the cover is very easy). Look on the driverside near where the coolant tubes enter the heater, there should be a screw valve on the top tube. Third with the coolant tank cap off start the car, get it running hot, but watch the coolant level to make sure it does not over flow. Once it start to get hot, unscrew the bleeder valve and wait until it has a good flow of coolant coming out of it. This should bleed the system. Watch the coolant level, and refill as needed.


Where is the coolant temp sensor on an 1999 Audi a6 quattro 2.8?

how do i diagnose a heat problem in a 1999 audi quatro


Coolant for VW polo?

Recommended coolant/ antifreeze for vw, audi, skoda, seat is G12. Very good coolant, helps, lubricates an works as a anti-corrosive serum.


What kind of antifreeze do you put in 1999 vw beetle?

Important!!! Use only G12 coolant for any Volkswagen or Audi. DO NOT MIX FACTORY COOLANT WITH ANY OTHER BRAND Dealers will have it for approx 20-30 dollars per gallon. Pentosin produces the coolant for Volkswagen, Audi and BMW.


Why is Audi 1998 1.8 overheating?

Most likely it is the headgasket being blown. Check the coolant level. If there is oil in the coolant and water in the oil there is your clue.


What is the location of Classic Audi in Eastchester New York?

The location of Classic Audi in Eastchester, New York is 541 White Plains Rd, Eastchester, NY, 10709. It is a dealership which offers used and pre-owned Audi cars.


Why are ths brakes spongy on your 1995 Audi a6 quattro?

You have to bleed your brakes, there is air pockets in the lines...


Where is the alternator location in a 2000 Audi a6?

between the bumpers


How do you replace the ignition switch on a 1998 Audi A6 Quattro?

2002 Audi quattro 1.8 ignition module location