IF ITS A QUAD 4 THE HOUSING IS ON THE RIGHT SIDE OF THE VALVE COVER BY THE Power Steering BELT 2 BOLTS.
if you have a 3.3l v6, then you follow the upper radiator hose to where it connects to the block. It's around the throttle. The place where the hose connects can be removed, and the thermostat is in there.
Follow the upper radiator hose from the radiator to the engine. Where it meets the engine there is the thermostat in the housing. Make sure you install the spring TOWARD the engine when replacing it. GoodluckJOe
how do i replace a water hose in 1993 pontiac grand am
The camshaft sensor on a 1993 Pontiac Grand Am is located behind the rear bearing cap. It detects the position of the camshaft as it rotates and relays this information to the computer.
A 1993 Pontiac Grand Am weighs approximately 2,828 lbs. The Pontiac Grand Am stopped production in the year 2005. The car was replaced with the Pontiac G6.
If it is not visible at the door jamb, it is probably located in the latch mechanism
Behind the dashboard just off center.
Make sure the radiator is full of coolant; if it is, then change your engine's thermostat which is located at the lower end of the top radiator hose within the water outlet.
yes it will pontiacs are interchangable from the years 1993-1996
Does a 1993 Grand Am have air bags
front of the motor bottom of the block on my 96
Under the dash in front of the drivers' left knee.