The clutch slave cylinder is probably At Fault. Replacement is necessary to fix problem. Transmission must be removed to gain access to the slave cylinder.
the slave cylinder is the easiest position compared to the master cylinder...
1991 S10 4.3...
transmission fluid
Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.
It is bolted to the flywheel on your transmission
Perhaps slave cylinder, line or fitting leaking?
Clutch chatter, clutch slippage and difficulty getting transmission into gear when stopped.
could be freeze plug, or intake leaking
Sounds like the clutch master or brake master is leaking hydraulic fluid.
Inside the transmission bell housing. The transmission must be removed to gain access to the clutch slave cylinder.
It is made on to the clutch slave cylinder that mounts on the side of the transmission.
You will need to remove the transmission to replace the clutch slave.
It is inside of the transmission bell housing. You will have to remove the transmission to service it.
The clutch pedal is the one left of the brake pedal. The clutch disk the pedal affects is inside the transmission bell housing where the engine block bolts to the transmission. Unless you have an automatic, then your car has no clutch.