0
Why is there coolant in the intake plenum of my 94 Toyota pickup v-6?
Wiki User
∙ 13y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where is the pcv valve located on a 1992 Toyota Pickup 6-cylinder?
Under the intake plenum
A Diagram of a 1990 Toyota Pickup heater plenum?
Where is the plenum bolt for a 1994 toyota pick-up
Where is the pcv valve located on a 1989 V-6 3.0 Toyota pickup?
It's comes out of the passenger side rocker arm cover. There's a mess of vacuum lines coming off the intake plenum, and it's directly under them. It's nearly impossible to get to it without removing the intake plenum. Reference a Chilton's manual for directions, and make SURE that you label all vacuum and coolant lines accurately.
How do you replace rear plugs 2000 Toyota Camry?
remove upper intake plenum
Where is the carburetor on a Toyota tercel?
Follow the intake air plenum from the air filter. It connects to the carburetor. The carburetor is mounted on the intake manifold.
Where is the fuel filter located on a 1990 Toyota Cressida?
Its under the intake manifold/plenum towards the rear of the engine
Where is the intake plenum on a Toyota engine?
The intake plenum on a V-6 or V-8 is bolted to the top of the intake manifold. It has the throttle body bolted to it. The throttle body houses the throttle plate and is located at the end of the tube that starts at the air filter housing. Sometimes the intake manifold on a 4 cylinder is referred to as a plenum. It works the same way and is found in the same manner. Look for the air filter housing, then follow the hose past the throttle body to the intake or plenum.
After beginning to produce white smoke from the exhaust a 98 Bonneville dies and would not start again what could be causing this?
White smoke is coolant in the cylinders. Died and won't restart cause the spark plugs are shorted with coolant. If you keep trying to start it without fixing it you could bend a rod! Most likely it is a failed intake manifold gasket or intake plenum gasket or the intake plenum itself. Don't drive the car cause if it is the plenum leaking coolant into the engine it can fill a cylinder with coolant and do major damage when you try to start it. No way to know for sure which of the three it is without pulling the plenum. If you're pulling that you might as well change the intake manifold gasket too. Could be a bad head gasket
What does the other end of pcv vavle tube connect to on a 98 Toyota sienna?
It connects to a nipple on the bottom of the intake plenum. Reach under the top left side to find the connection point. With the intake plenum installed it is a blind connection.
What gaskets will you need to repair a coolant leak coming from the intake manifold on a 1996 Camaro 3800 V6?
You will need a intake manifold set and possibly a plenum gasket set.
What is the plenum on a 2002 Kia Sedona?
The plenum is the intake manifold.
Does A 1995 Ford pickup xlt have a air plenium?
Yes, the air plenum is just the plastic device that routes air to the throttle body intake.
