it does go thru the turn sig switch , did you check for power at the switch and does it come out when you press brakes? if so the next place it goes is into turn sig sw... Rick ASE L-1 Master TransMichigan.com
Sounds like your dimmer switch isn't working or it is turned all the way down for night driving.. It has a setting that allows you to turn off the lights on your dash and radio for driving at night. Locate your dimmer switch and see if it is turned down all the way. If not it may have gone bad and needs to be replaced.
I had the same thing happen to me and my 96' suburban. It turned out to be that the battery was shot and wouldn't hold enough of a charge to turn over the engine. Might be the same thing with you.
she drives a Porsche convertible but she wants a Chevy suburban
He has a 2012 Ford F-250Also has a Chevy Suburban and a Tahoe.
That's because your car is equipped with a light sensor that works in that way; after a few seconds the lights will go off. Any more questions?, please feel free to contact me at alg11@televicable.net.mx
Bad switch.
No brake lights but turn signals work? Turn signal switch brakes route through it.
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
The relay switch for the locks on a 99 Chevy Suburban is located under the driver-side dashboard.
Chevy did not use them on there trucks.
Chevy did not use an Inertia switch on there trucks.
Check sockets and grounds
and that didnt fix the problem?
The light switch.
I just replaced the front heater motor in my 99 Suburban, it worked great, now the heater/ac absolutely does nothing. Could the switch be bad, the motor, I am stumped and need help. Thanks Jim.
turn signal switch needs replaced!
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs