not without changing alot of wiring and electrical junk
Yes. They both use the 4L60E transmission.
Yes, they both had the same transmission options.
Will a 1997 blazer what work on a 1999 blazer????? If your talking engine, transmission, or running gear than yes. It is all the same.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
NO it will not even began to work. All together different.
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
Yes, you can put a 1998 4WD S10 drive-train on a 1997 Chevy Blazer. However, it will not be an easy process and will require a lot of work to get it installed correctly.
It will if the 99 had a 4.3L in it too.
yes I agree.....
NO. The bellhousing is different on the 96 model. Won't work.
The ONLY ONE that you can put in it is the 4L60E. Nothing else will work.
the bell housing is DIFFERENT on the 97 trans. You must put a 1993 to 1995 or 1998 are 1999 4L60E transmission back in it. The 1996 and 1997 will not work in the 98.
if it's out of a 95 blazer it will work
No it will not work. All the wiring connectors and the computer is different in the 95 not just that but the transmission is designed different.
No it will not. In late 1999 GM. redesigned the transmission, therefore it will not even bolt up to the 98 model.
No it will not work, Is it not the same.
NO... The only ones that will work is a 1996 or 1997 4L60E transmission if it is a 1/2 ton. The 3/4 tons used the 4L80E in them.
Yes it will fit right in there and hook right up.
if the blazer is 4x4 and the s-10 has a 4.3 engine then the answer is yes
You can't. The 4L80E is an electronic computer controlled transmission. The 88 blazer computer will no shift the transmission are even begin to work.
1993 was the first year the automatics used the electronic 4L60E transmission. Any 1993 - up Blazer/Bravada/Jimmy/S10/S15 automatic transmission should do.
No, it will not work. The 86 is a mechanically controlled transmission, vs. the electronically controlled transmission of the 96 (which also means the engine ECM will be programmed to function with that electronically controlled transmission).
your problem is the transmission. you need to replace the transmission
It MUST have a 1996 4L60E put back in it.........