0
You have no stop or turn lights on your 96 suburban K2500 All fuses are good Is there a relay Are they all tied together through the brake light switch?
Wiki User
∙ 9y ago
The brake lights and signal lights are tied together in the signal switch, also known as the "multifunction switch".
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Why would brake lights not work on 2002 Chevy Suburban when fuse switch and bulbs are good?
No brake lights but turn signals work? Turn signal switch brakes route through it.
Why do the brake lights come on and off as they wish on your 1999 Chevrolet Suburban?
Replace brake light switch.
96 Chevy Suburban no dash lights and no tail lights Any suggestions Turn signals brake lights etc work fine?
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
Why would cause the brake lights not to work on 2002 Chevy Suburban if the bulbs and fuse are good?
Bad switch.
Why don't my dome lights turn off on my 1998 Chevrolet Suburban?
Either your headlight switch is turned all the way to the left or you have a defective door switch.
How do you repair instrument panel lights that doesn't turn on on a 1995 GMC Suburban?
To fix the 1995 Suburban instrument lights, check the light fuse first. Check the light switch. If these are ok, then check the instrument cluster for proper power and ground connections.
How do you Turn Daytime Running lights off on 2002 suburban?
hit your dome light on/off switch 4 times...it says how to do that in your manual
Why would Chevy Suburban dash lights running lights and high beams not work even though the fuses are good?
The headlight switch may be bad. Try replacing. Its the Headlight switch. The switch has a built in Circuit Breaker that self resets. It has become bad and will eventually give it up.
Why do your bright lights work and not your regular lights on your 1993 gm suburban?
Do you flip the hi beam switch and it's still on hi beams or no head lights are on in the switched position/ Find the headligh relay and swap it out with a another relay
Brake lights out on 1997 Suburban fuse is good Tail lights turn signals and hazard lights work I checked the fuse its good?
check the brakelight switch. it is located under the dash where the brake pedal rests. Hey its ritchie. If you can click your blinker down and then they work its you blinker switch,but this is my monte.
1997 suburban Brake lights and turn signals work but tail lights dont what do I do?
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
How can you fix your 1997 Chevy Suburban the head lights hazards turn signals and brake lights do not work and the fuses are good please advise?
May possibly be in the multifuction switch on the left of the steering column!!!!
