One example might be in a warehouse where the robots follow 'tracks' to and from the shelves they stock and retrieve from.
Robotic vehicles that were capable of following a line were often used to deliver products to different areas of a warehouse or manufacturing facility.
nope
can be used in a driverless car
There are no applications for losses, that's why they are called 'losses'!
From the factory a lot of SPOT WELDS are used. That I know. Whenever you see a bunch of circles in line, spaced out, and at the joints of two surfaces-thats a spot weld. For doing "re-word" or modifying, typically MIG is used for many applications. However, others can be used as well.
Robots came about to help people. the first robot was made in 1961 and joined the assembly line at General Motors (GM) ever since people are striving to find new technology to better our population.
It is a speciality in electrical engineering dealing with higher voltage applications such as employed in electrical transmission, switch yards and any applications requiring extraordinary power requirements. It is involved with such things as wire insulation, special designs to avoid arcing, power line towers and so forth.
can be used in a driverless car
It sounds like you are using an NXT unit, but to make a line follower, you don't find the distance between the robot and the line, you find the line and center it under you. I would recommend using the light sensor because it will allow you to find the area where the line is darker than the surrounding surface. Then, whenever the line is not centered under your robot, you have it go back and forth until it finds it.
In the future, a line following robot could be used to lay groundwork for a small structure, repaint objects such as baseball diamonds, lay a trail of something down, or even plow the ground for farmers.
maybe ask in adifferent way or go to a different site I'm a real person not a machine thank you bye
Off-line Programming (OLP) is a Robot programming method where the Robot Program is created independent from the actual robot cell. The robot program is then uploaded to the real robot for execution. In off line programming the robot cell is commonly represented as a graphical 3Dmodel.
It always need a path to run either white or else since the IR rays should reflect from the particular path (color mostly used white on black).
For repetitive tasks which use the same path things like following one on the floor of a factory to remove the need for a human operator also lines of metal placed under lawns can be used as a guide for a robot lawnmower
can be used in a driverless car
What are the practical applications of influence line diagram
The robot has sensors in its base that detect to difference in brightness between the white surface and the black line. It is programmed to stay on the black line by computer software.
Procedure and constuction of a simple robot.how to make it
4eyes