0
Yes, 2 million ohms represents a very high resistance. In electrical terms, resistance is measured in ohms, and a value of 2 million ohms (or 2 megohms) indicates that the material or component resists the flow of electric current significantly. This level of resistance is common in certain applications, such as in insulation or high-resistance circuits.
What else can I help you with?
What is the total resistance of three resistors in parallel with values of 2 ohms 8 ohms and 14 ohms?
Current, by Ohm's Law, is voltage divided by resistance, so, 18 volts divided by 2 ohms is 9 amperes.
What is the total resistance of a 6-ohm resistor and a 12-ohm resistor in a parallel series?
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
A 3 ohm 2 ohm and a 5 ohm resistor are in series What is the total resistance in ohms of the system?
10 Ohms.
How much voltage is required to make 2 amperes flow through resistance of 8 ohms?
Ohm's Law: voltage is current times resistance, so 8 amps times 2 ohms is 16 volts.
Five resistors are connected together in series One resistor is 2 ohms one is 3 ohms one is 4 ohms one is 5 ohms and the fifth is 6 ohms What is the total resistance?
Purely additive. 2+3+4+5+6=20.
How do you write 20 million ohms?
To write 20 million ohms, you can express it as 20,000,000 ohms. In scientific notation, it can be written as 2 x 10^7 ohms. Both formats effectively convey the same resistance value.
Whats the difference between 2 ohms and 4 ohms?
2 ohms of resistance
Is 2 ohms louder than 4 ohms?
Ohms is a measure of impedance (resistance), not volume.
What has higher 1.8 ohms or 2 ohms?
2 is larger that 1.8
What is the total resistance of three resistors in parallel with values of 2 ohms 8 ohms and 14 ohms?
Current, by Ohm's Law, is voltage divided by resistance, so, 18 volts divided by 2 ohms is 9 amperes.
How many ohms in 800 watts?
To calculate the resistance in ohms, you also need to know the voltage. The formula to find the resistance in ohms is R = V^2 / P, where R is the resistance in ohms, V is the voltage, and P is the power in watts.
What is the total resistance of a 6-ohm resistor and a 12-ohm resistor in a parallel series?
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
How many Ohm resistances do you need to connect in parallel to produce a total resistance of 10 Ohm?
For an end-result of 10 ohms, you can have 1 resistance of 10 ohms, or 2 parallel resistance of 20 ohms each, or 3 resistances of 30 ohms each, etc.
There are three sources of resistence in a parallel circuit two of them are rated at 20 ohms the other 10 ohms what is the circuits total resistance?
The total resistance is 5 ohms. Scroll down to related links and look at "Parallel Resistance Calculator".
What is the acceptable value of grounding resistance for any application?
An acceptable resistance for a ground to ground plate system is 2 ohms with a maximum allowance to 5 ohms. If the measured resistance is above 5 ohms more grounding rods or plates have to be added to reduce the resistance down to the acceptable levels.
What is the resistance of a parallel circuit with resistance of 2 ohms 4 ohms 6 ohms and 10 ohms?
R = 1/[1/2 + 1/4 + 1/6 + 1/10] Add up the reciprocals of the resistances, and take the reciprocal of the answer.
What is the resistance of a parallel circuit with resistances of 2 ohms 4ohms 6ohms and 10ohms?
The equivalent resistance of four resistors in parallel, the resistors being 2, 4, 6, and 8 ohms, is 0.96 ohms. RP = 1 / summationI=1toN (1/RI)
