Cleaning

Unfortunately if your battery stain is white, it has penetrated too deeply into the concrete slab to bring back the color. Concentrated sulfuric battery acid has been known to eat through a 4" slab of concrete. Your best bet would be to cover it with a carpet or mat.

Puddleblocker makes an inexpensive golf cart mat and has mats produced to go under vehicles too.

To keep the white stain from spreading (which it will!) you should neutralized it immediately. Here are some ways:

1) use TSP (Tri-sodium Phosphate) from a home improvement store- spray it on, agitate with a broom all over the stain and allow it to soak in. Then rinse it out with your garden hose.

2) Use any commercial grade degreaser in place of TSP. Any alkaline product will work.

Now, if your concrete stain is red, orange or brown... you have orange battery acid burn. The orange can also penetrate the concrete very deeply, up to 2" down into the cement. What we use, (and it works awesome!) is a product called F9 BARC. It is a battery acid restoration product made by front9restoration.com but is formulated for professional use. It's usually better to hire an F9 Authorized Professional Rust Removal Contractor than to try to tackle the restoration job on your own. The Professionals can get great results and use professional power washing equipment to aid in the restoration.

By the way, we have also used F9 Concrete Rust Remover on fertilizer stains, rust, irrigation stains and mud stains on walls... they all came out 95-100%.

Methylated spirit, also known as denatured alcohol, can be effective in removing some stains due to its solvent properties. However, it may not be suitable for all types of stains or surfaces. It's important to test it on a small, inconspicuous area first to ensure it doesn't damage the material.

To remove berry stains from concrete, try creating a paste of baking soda and water and scrubbing the stain with a brush. You can also try using a commercial concrete cleaner or a mixture of vinegar and water. Allow the solution to sit on the stain for a few minutes before scrubbing and rinsing with water.

Yes you can. Just don't put dishes in it at the same time!

just pour a puddle of clr and water mixture (mix as per instructions on bottle) onto the bottom of the dishwasher. -Don't use to much or the dishwasher will have bubbles on your floor.- Make sure to scrub problem areas e.g. calcium and rust. then run dishwasher EMPTY on it's "light wash" or "quick rinse" option and turn off the heat dry (you don't need to dry an empty dishwasher!). Do not leave the house until the cycle has finished. When cycle is finished, remove the filter and sprayer arms/tower and rinse in clean water. repeat if necessary.

Enjoy your now clean dishwasher.

It is not recommended to clean carpets with bleach as it can damage the carpet fibers and discolor them. It is best to use carpet cleaning solutions that are specifically designed for carpets, or consult a professional carpet cleaner for advice on appropriate cleaning methods.

Shout removes stains from jam, grass stains, coffee stains, ink stains, blood stains, motor oil stains, etc.

RIT...I swear by it. It's not as cost effective but works much better than bleach. It doesn't leave blotches or yellow stains like bleach. And because it dissolves in the water, it applies more evenly to the fabric. I actually use it when my solid whites start to look dingy. GOOD LUCK

To remove tape residue from a t-shirt, try dabbing it with a cotton ball soaked in rubbing alcohol or nail polish remover. You can also try applying a mixture of dish soap and warm water to the affected area, letting it sit for a few minutes before scrubbing it gently. Wash the t-shirt in cold water afterwards.

Muriatic Acid it extremely corrosive and highly caustic. To clean glass windows with it, is not recommended.

Ammonia, however, does clean windows very effectivly and doesn't leave streak marks.

A mixture of vinegar and water or a solution containing bleach can be effective in cleaning mold. It is important to ensure proper ventilation while using these solutions and to wear protective gear such as gloves and a mask. Additionally, always follow the manufacturer's instructions for any cleaning product being used.

synthetic detergent contain hydrophobic and hydrophilic substance.the head(hydrophilic) contain sodium zedite.it can react with the ion in hard water and will become more effective.they can contact together.

example of hard water is sea water,it contain ion such as calcium and magnesium.these ions will react with sodium zedite and make synthetic detergent is more effective cleanser in hard water.

Since blood is made up of protein, the most effective way would be to use a biological washing powder. Biological washing powder contains protease, an enzyme that breaks down protein. The optimum temperature would be around 30 degrees Celsius.

However, even then, blood stains are very difficult to get out.

Lipstick can stain clothes if it smudges or transfers onto the fabric. However, using a stain remover or pre-treating the area before washing can help remove the stain. It's best to deal with lipstick stains promptly to prevent them from setting in.

Yes, bleach can sometimes remove permanent marker from a mirror, but it can also damage the surface of the mirror. It's important to spot test in an inconspicuous area first and use with caution, as using bleach on mirrors is not recommended by manufacturers. Other alternatives like rubbing alcohol or acetone may be safer options.

Rubbing alcohol (isopropyl alcohol) is toxic when ingested and can potentially be fatal in large quantities, even for someone with a tolerance to alcohol. It should never be consumed as a recreational beverage due to the serious health risks it poses.

On average, a cup of Tide laundry detergent weighs approximately 9 ounces. This can vary slightly depending on the specific product and formulation.

"Era" was chosen as the name for the laundry soap brand as it signified a new era of laundry cleanliness and effectiveness when the product was introduced. The brand aimed to symbolize a fresh start in laundry care for consumers.

This could happen if the detergent is added too late in the washing cycle after the water level has already risen. It's important to add the detergent before adding the clothes and to make sure the detergent dispenser is clean and free of residue that could prevent proper mixing. Additionally, using the correct amount of detergent for the load size and water hardness can also impact how well it mixes with the clothes.

If the stains were made by a washable marker, they will come out if you wash them in the washing machine with hot water. If they were made by permanent marker there is no guarantee that it will come out. Pretreat the shoelaces, rinse them, and soak them in bleach if they are white.

According to the manufacturer's website (linked below,) Dawn was invented in 1973.

No detergent can restore the color. Some of them and washing the same colors together and washing in cold water can prevent color loss. You can have the color restored by having them re dyed. You can do it yourself using rit dye or alterations specialist can do it for you.

You can remove blood stains by soaking the stained fabric in cold water and gently scrubbing with a mild detergent. For tougher stains, you can try using hydrogen peroxide or a stain remover specifically designed for blood stains. Avoid using hot water as it can set the stain.

It depends on how much ink and what type of ink. I wear lab coat and usually work with black pen ink lines or occasional blot of ink. With this smaller amount ink, hairspray works best for me. I will work it or soak it depending on the ink's response to the stain.

There could be several reasons why a Whirlpool washer won't use the fabric softener. It could be due to a clogged dispenser, incorrect dispenser settings, a malfunctioning dispenser valve, or a problem with the washer's programming. It is recommended to check and clean the dispenser, ensure the settings are correct, and consult the washer's manual for troubleshooting tips.

Tape leaves residue because the adhesive on the tape bonds with the surface it was attached to. Over time, this adhesive can break down and leave behind a sticky residue when the tape is removed. Other factors such as heat and pressure can also contribute to residue being left behind.