answersLogoWhite

0

🧪

Mining

Mining for coal is something that is widely known, but did you know that diamonds, uranium, copper, and other non-renewable natural resources are also mined? There are two types of mining; surface and subsurface. Questions about the methods and types of mining, what ores are mined, and related questions should be asked in this category.

4,677 Questions

What is the mechanism of the operation of a jaw crusher?

Jaw crushers can be separated into swing and complex swing types. Jaw plates are made from selected material and, with the extrusion plates, broken materials fall through the opening at the bottom. Materials are crushed while the two plates move close and the little pieces are thrown through the discharge.

How much exp is needed to get to lvl 85 mining from 70 mining?

try goin on to a website called sals realm of runescape and look for skill calculators thats what i did on all my skills

Why do gold mines close?

Gold mines can close for a number of reasons, eg. all the gold has been mined out; the ore is not good enough to pay for mining it; gold prices drop below profitability, the miners go on strike, the mine collapses...

Where is the best place to advertise a gold mine?

The best place to advertise a gold mine is online advertising through Search Engine Optimization (SEO). Lots of affordable seo service now that offers affordable seo packages.

What is the best way to mine gold and why?

A good place to mine gold is in Arzinian Mines, after the quest Between a Rock. The Arzinian Mines are hidden in the mines south of Keldagrim. There are 146 gold rocks in this mine, and you can use the ferrymen to take your gold ore to the bank, for a price of 6 gold ores (or 3 if the Ring of Charos is worn). Another good place is in the Crafting guild as there are seven gold rocks there as well as some silver and clay. The disadvantages to this method are that it's a long walk to the nearest bank and it can be quite full sometimes and most people tend to fight over it and this may be a very unpleasant way to mine gold. However, this disadvantage can be alleviated with a Ring of duelling teleport to Castle Wars to bank and using the Balloon Transport and one oak log to fly back to the Crafting Guild or by using a Skills Necklace. You can also use an Explorer's Ring 3 to teleport to the cabbage patch and run to draynor then teleport back to the cabbage patch from draynor bank and run to the crafting guild. The best place to mine gold is the Brimhaven north-west mine. If the Fairytale II - Cure a Queen and Holy Grail are completed, it is very easy to get to a bank. Slightly north of the rocks is a watchtower that you can walk under, as is done during the Holy Grail Quest. Blowing a Magic Whistle under it will result in the player being teleported to the King Fisher Realm. From here, run north across the bridge and use the Fairy Ring to teleport to Zanaris to bank the ores. Repeat to get back to the mining spot using the Fairy Ring Code BJR. There is also another mining spot further south, which is close to the entrance to the Brimhaven Dungeon.

What happens to gold after the mining process?

You make jewellery, or sell it, after you've smelted it into a bar.

How do you get mining points in monster hunter freedom?

Mining Points is just another name for Kokoto Points. If you don't know what these are, they are points you can get to upgrade (pretty much) the farm.You get these by buying and sellling items to people in the town. You get the full amount of money and Kokoto Points if you SELL an item(s). You get 10% of the price you paid for an item(s). And finally you get 9% of the price in Kokoto Points if you BUY armor and/or weapons(s). So all you have to do to get them is buy and/or sell stuff!

EDIT: Mining Points are not Kokoto points. Mining Points are upgrades to your mining area which give you access to better ores. I believe Pure Crystal can be gotten occasionally from Mining Point+2. Mining Point upgrades are purchased with Kokoto Points, explained above. Mining Point upgrades become available as you progress through Village Elder quests.

Where is placing mining the most common?

Outside Lumbridge. Go like south-westish from Lummy and some u will be at one of the best mines for mining noobs.

Which one is better a cone crusher or an impact crusher?

Cone crusher and impact crusher are two different kinds crusher and are used in different areas and suitable for different materials. And the most suitable for you is the best.

Impact Crusher

Impact crusher can handle various ore materials (granite, limestone, basalt, etc.) whose particle size are less than 500mm and compressive strength are not more than 350 MPa. With features of large broken ratio, energy efficient, easy maintenance, cube nesting particle sized products, adjustable particle size, PF impact crusher is widely used in the water, electricity, highways, railways, artificial aggregates, construction and other industries. At present,China's first large single-stage impact crusher successfully rolls off the production line in DAMAC, owing to which the secondary crushing process can be achieved only by using this single-stage impact crusher. This is another limestone in china crusher equipment research and development history since the production of single-stage hammer crusher.

Working Principle:

Driven by the motor, the rotor rotates at a high speed. When put into the equipment, materials will hit against plate hammer on the rotor and be broken, and then counterattack to the liner again broken, and finally drop from the discharge port.

Cone Crusher

Adopting the latest technological development, PY Series spring cone crusher are suitable for hard and mid-hard rocks and ores like iron and copper ores, limestone, quartz and granite, etc. PY Series spring cone crushers are the ultimate solution for the secondary crushing to achieve uniform product size of hard rocks, ores and minerals.

Working principle: Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.

What are the advantages of gold mining?

what are the advantages of silver service to an establishment?

Where is the mining area in al-kharid in runescape?

If you go through the gate in lumbridge to al-kharid then go north west there it is. Also you can look at map it is just north of it. LOWER LEVELS look out for lvl 14 scorpions they will attack you.

What are the negative impacts of mining on health?

Mining is a dangerous business, particularly underground mining. You can be killed, injured or disabled in a mining accident. The physical risks are tremendous, and are a challenge to manage. Any equipment or method that is applied to loosen and remove rock can do a lot of damage to a person, even if it does not kill him outright.

In addition to physical risks, there are health risks associated with breathing dust and other airborne contaminants in and around mines. Chemicals used to process ores are in a lot of cases toxic. Coming into contact with them cannot always be avoided. Skin contact can permit toxins to enter the body and bloodstream, even if a respirator is being worn.

There are lots of ways to become killed, injured or develop a serious medical issue if you work in and around a mine. There may be some other hazards unique to the type of material being recovered, but the above remarks cover the general issues.

Who is a person who uses a pickaxe?

People who usually pickaxes are miners who work in mines to extract coal and other ores from the Earth, or loggers who use pickaxes to dig up the gnarled roots of some trees who refuse to come up when they try to knock it down.

What is artisanal gold mining?

An artisanal or small-scale miner is, in effect, a subsistence miner, who often undertakes the activity of mining gold seasonally - for example crops are planted in the rainy season, and mining is pursued in the dry season. They are not officially employed by a mining company, but rather work independently, mining or panning for gold using their own resources. They tend to use primitive methods of mining, including the use of very toxic mercury to extact gold.

Where were the millions of limestone blocks for the three great pyramids quarried?

The bulk of the limestone used to construct the three great pyramids at Giza was quarried on the Giza Plateau.

What are three minerals that glow under ultraviolet light?

  1. Fluorite: Fluorite can exhibit a fluorescent response under ultraviolet light, emitting various colors.
  2. Calcite: Certain varieties of calcite, such as Iceland spar, can fluoresce under UV light, appearing red, blue, or green.
  3. Willemite: Willemite can fluoresce a bright green color under ultraviolet light due to traces of manganese.

How do you get feldspar?

Go to an area nearby a formerly active volcano and you will find feldspar, because it is an igneous rock. Or you can go to an area such as Yellowstone Park where there are open rock areas and you will be sure to find feldspar.

In what year was gold first found?

First gold found at Sutter's Mill, California, 1848On January 24, 1848, James Marshall found this tiny piece of gold in a stream near John Sutter's sawmill in northern California. News of the discovery inspired the great Gold Rush of 1849. Marshall and Sutter gave the gold nugget to a U.S. Army officer in San Francisco, who sent it to Washington, D.C., to the National Institute, a predecessor of the Smithsonian Institution. When the institute's charter expired in 1862, its collections were transferred to the Smithsonian.