answersLogoWhite

0

📱

Technology

The practical application of knowledge, especially in a particular area, is called technology. Advances in technology affect every area of our lives. This category is for questions about technology and includes everything from how to remove a scratch from a CD to applications of electronics to what polyester is made from and more.

35,090 Questions

Where do you find your SSID code?

An SSID isn't on a wii, its a name for your router on your computer so you have to find it on your computer first. On a Windows computer, go to Start>Control Panel>Network and Internet Connections>; now you have a small screen that says, (in white) "Pick a Task..." and it lists several options, and below, "Pick a Task...", it says, (in white), "or pick a Control Panel icon". Now click: Wireless Network Setup Wizard>; this will bring up a small grey setup info box. Click: Next>Set up a new wireless network>; and at the top it should say: "Network Name (SSID)" followed by a box with your SSID in it!!! Hope I helped! I know how hard this is because i had to figure it out all by myself, and im only 13!! :). <3. God Bless.

How do you buy characters in Lego batman 3?

You must first complete the Story Mode to the end of "Level 7: Europe Against It" before you can buy characters you found Character Tokens of. Once you're past Level 7 a switch will appear in the Batcave or Watchtower's Control Room (right next to the Trophy Room entrance door) to get the character grid.

Discover where to find all 150 playable characters in Lego Batman 3: Beyond Gotham below!

What services are provided by data center companies?

The communication services offered: E-mail - this is sending a message electronically over the internet, from the sender to the receiver. It is similar to sending a letter by post as each person has an address only an e-mail is sent electronically via the internet to someone's e-mail address. The World Wide Web - this is a collection of documents and other resources linked together using hyperlinks which are viewed via an internet connection. Remote access - The Internet allows computer users to connect to other computers and information stores easily, wherever they may be across the world. They may do this with or without the use of security, authentication and encryption technologies, depending on the requirements Forum - this is a place that people who have the same interests can share ideas and talk among each other, similar to a chat room. File sharing - a file can be E-mailed by the internet using an attachment in the E-mail. A computer file can also be put on to a shared location on a shared network, this means people who are in the company or organization has access to it, for example this can save giving out lots of paper photocopied to lots of colleges in a work place. Streaming media - Radio and television broadcasters provide Internet "feeds" of their live audio and video streams. Voice telephony - VoIP stands for Voice over IP, where IP refers to the Internet Protocol that underlies all Internet communication. This began as an optional two-way voice extension to some of the instant messaging systems. This has become easy to use and is much cheaper or even free than normal calls especially for long distances.

What is cleverbot?

yes it is...if you ask this "cleverbot" if its a human or not and if you get an honest graduate student (the guy who answers your questions) then he will tell you the truth...the thing is though its more than one person...its at least 50 people answring questions around America and Canada...in fact you can even apllie for a job on that site...hope i helped

Why was the chainsaw invented?

First ChainsawThe first chainsaw was made around 1830 by German orthopedist Bernard Heine.

What are the 3 types of technology that use echolocation?

idk now but who ever now the answer plez answer this because i need this for a p roject plz p,llz plz pllz plllzpplz bye by bey byebye

How many cell towers are in the US?

The CTIA said that in 2006 there were 175,000 and the number was expected to grow to 260,000 in 2010. Here is a list of the current installed towers http://www.cellreception.com/towers/

What is the process of brazing?

This article is about the metal joining process. For the cooking technique, see braising. Brazing is a joining process whereby a filler metal or alloy is heated to melting temperature above 450 °C (842 °F) - or, by the traditional definition in the United States, above 800 °F (427 °C) - and distributed between two or more close-fitting parts by capillary action. At its liquid temperature, the molten filler metal and flux interacts with a thin layer of the base metal, cooling to form a strong, sealed joint. By definition the melting temperature of the braze alloy is lower (sometimes substantially) than the melting temperature of the materials being joined. The brazed joint becomes a sandwich of different layers, each metallurgically linked to the adjacent layers. Common brazements are about 1/3 as strong as the parent materials due either to the inherent lower yield strength of the braze alloy or to the low fracture toughness of intermetallic components. To create high-strength brazes, a brazement can be annealed to homogenize the grain structure and composition (by diffusion) with that of the parent material . * http://en.wikipedia.org/wiki/Brazing

Is a modem a cable?

The ethernet cable is the cable with end plugs similar to a phone cable but a little larger in appearance. The cable modem may have one leaving it to go to your PC or your router for a home network

Why do large organisations need to back up their data in different locations?

The simple answer is - security. It's no good backing up their computers, then keeping the back-up on-site. If the building is damaged by fire - they not only lose their equipment, but the back-up too. Lots of big companies put their data back-up in their bank's vault !

I run my own reptile business, and I would be devastated if I lost my back-ups. I store mine in a fire-proof safe - which is embedded in the concrete floor of my reptile 'house'. The building is separated from my house by about 200 feet.

What is better macook pro or iMac?

Both are good, but the i mac has more features, a huge screen and they give you a magic mouse and a mac keyboard. While the mac mini is a hard drive and can turn any PC into a mac and it is cheaper but slower. So, it is your choice.

What is a tube microphone?

The tube or the FET transistor is used to build an impedance converter from the high impedance of the capacitor (condenser) of about 1 Giga ohms or more to the low impedance of the microphone output, which is less than 150 ohms.

What is the diameter of a mini DVD?

It is the same like a normal CD. It's 12 cm, or 120 mm.

What does a job in computer science entail?

Networking, Program writer for banking firms, Internet IT maintenance, you can get a job as an IT associate for telemarketing company maintaining servers and networking the system. Anybody else?

Where is technology found?

In things we make and the places in which they are made.

What are the two major types of drafting?

The Different drafting lines are the following:

  • visible - are continuous lines used to depict edges directly visible from a particular angle.
  • hidden - are short-dashed lines that may be used to represent edges that are not directly visible.
  • center - are alternately long- and short-dashed lines that may be used to represent the axes of circular features.
  • cutting plane - are thin, medium-dashed lines, or thick alternately long- and double short-dashed that may be used to define sections for section views.
  • section - are thin lines in a pattern (pattern determined by the material being "cut" or "sectioned") used to indicate surfaces in section views resulting from "cutting." Section lines are commonly referred to as "cross-hatching."
  • phantom - (not shown) are alternately long- and double short-dashed thin lines used to represent a feature or component that is not part of the specified part or assembly. E.g. billet ends that may be used for testing, or the machined product that is the focus of a tooling drawing.

What is electronic cigrattes?

An electronic cigarette is an electronic device who is intended to simulate the smoking habit without generating smoke or nicotine. This device is working with some oil essences which generate the sensation of smoking though heating of these oil by it's internal atomizer, powered by an low voltage electric accumulator. This one can be rechargeable in time and also the container of the oil can be refilled or replaced at a low cost.

Why physical address is needed when IP address is present?

Without a physical address, you will not be able to access a network outside the LAN that you are on. This is simply due to the fact that the computer on another LAN would not know where to forward the requested information. Your IP address work on the Internet Protocol within routers and switches, and associates it finding with your local machine (computer) by way of its mac address (physical address). Notice, your computer does not have an IP address, when you log on to the Internet a DHCP server issue you a leased IP address which is associated with your MAC for the duration of time that your computer is log on to the NET. There are quite a few reasons why your computer would not be network operable without a MAC address, this is just one of them.

When you were installing windows 7 home premium on to your new computer it crashed now it says 'bootmgr is missing' help?

Nothing is missing you just need to reinstall windows completely again.

Follow these steps while installing windows.

  • Just connect the CD Drive and a hard disk in which you want to install windows.
  • Turn on computer and Insert CD in CD Drive.Computer will automatically detect boot from CD.
  • If the boot is not selected then select Boot from CD.
  • Install windows using installation wizard.
  • Turn off Computer and then connect all drives in correct ports (SATA ports).
  • Turn on Computer and press F2 at the First page displayed for bios option.
  • Change the boot order of drives such that the first drive is the drive in which Windows is installed.
  • Save changes and exit Bios.
  • Then the computer will turn on.