Acura MDX

The yellow horseshoe icon with an exclamation point on your Acura MDX dashboard typically indicates a problem with the vehicle's tire pressure monitoring system (TPMS). This warning suggests that one or more tires may be under-inflated or that there is a malfunction in the system itself. It’s important to check your tire pressures and inflate them if necessary, and if the light persists, consult your owner's manual or a professional mechanic for further diagnosis.

To remove the center console on a 2004 Acura MDX, start by disconnecting the negative battery cable to prevent any electrical issues. Next, remove any screws or bolts securing the console, typically found in the storage compartment and near the gear shifter. Carefully pry off the trim pieces and detach any wiring harnesses connected to the console. Finally, lift the console upwards and out of the vehicle.

To clear the maintenance required code on a 2005 Acura MDX, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. This action should reset the maintenance light. Finally, turn off the ignition, then start the engine to confirm that the maintenance light has been cleared.

To change the fuel filter on an Acura MDX, first, ensure the vehicle is turned off and the fuel system is depressurized. Locate the fuel filter, which is typically found along the fuel line under the vehicle or near the fuel tank. Disconnect the fuel lines from the filter, taking care to catch any spilled fuel, then remove the old filter and install the new one, ensuring the flow direction is correct. Finally, reconnect the fuel lines, check for leaks, and start the engine to ensure proper operation.

To reset the A12 maintenance light on a 2007 Acura MDX, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and then scroll to "Maintenance." Select "Reset" for the A12 maintenance item, and confirm the reset. Finally, turn off the ignition and then restart the vehicle to ensure the light has been cleared.

If the maintenance light is on in your 2007 Acura MDX, it typically indicates that it's time for routine maintenance, such as an oil change or other scheduled services. To reset the light, turn the ignition to the "ON" position without starting the engine, then press the gas pedal three times. If the light persists after maintenance has been performed, it may indicate a deeper issue that should be diagnosed by a mechanic. Always consult your owner's manual for specific maintenance schedules and reset procedures.

To find the navigation code for a 2002 Acura MDX, you can check the owner's manual, as the code is often provided there. Alternatively, you can look for the code on a card that may have been included with the vehicle's original paperwork. If you can't find it, you can contact an Acura dealership with your vehicle's VIN, and they may be able to retrieve the code for you.

If your car won't move after the VSA (Vehicle Stability Assist) light comes on, it may be due to an issue with the traction control system, which can limit power to the wheels to maintain stability. Additionally, there could be other underlying problems, such as transmission issues or low fluid levels, that are preventing movement. It's advisable to consult your vehicle's manual and have a professional technician diagnose the issue to ensure safe operation.

A16 on an Acura MDX indicates a specific maintenance service that includes an oil change, tire rotation, and a general inspection of various systems. The "A" refers to the oil change, while the "16" signifies that it's time for specific scheduled maintenance, such as replacing the engine air filter and cabin air filter. The cost for this service typically ranges from $200 to $400, depending on location and dealership pricing. Always check with your local dealership for the most accurate pricing.

The EGR (Exhaust Gas Recirculation) valve on a 2002 Acura MDX is typically located on the intake manifold, towards the rear of the engine. To access it, you may need to remove some components, such as the engine cover or intake manifold, depending on your specific model and configuration. It's advisable to consult a repair manual for detailed instructions and diagrams for your specific vehicle.

In a 2004 Acura MDX, the fuel pump relay is located in the under-hood fuse/relay box. This box is situated near the battery on the driver's side of the engine compartment. To access the relay, you may need to remove the cover of the fuse box and refer to the diagram on the underside of the cover to identify the specific relay for the fuel pump.

The 2009 Acura MDX is equipped with a 5-speed automatic transmission. This transmission features a sequential sport-shift mode, allowing for manual gear selection. It is designed to provide smooth shifting and enhance the driving experience, particularly in various driving conditions. The transmission is paired with a 3.7-liter V6 engine, delivering a balance of performance and efficiency.

The largest wheel size you can typically install on a 2005 Acura MDX is 20 inches in diameter. However, this may vary depending on the specific tire size and offset used, so it's important to ensure that there is enough clearance for the brakes and suspension components. Additionally, modifications or adjustments may be necessary to prevent rubbing during turns or over bumps. Always consult with a professional or refer to manufacturer guidelines before making changes.

The radio code for a 2005 Acura MDX is typically found in the owner's manual or on a card that came with the vehicle at the time of purchase. If you can't locate it, you can retrieve the code by contacting an Acura dealership with your vehicle's VIN. Alternatively, if the radio is locked, you may need to remove the radio to access the serial number, which can then be used to obtain the code.

If your Acura MDX fog lights remain on after turning the key to the off position, it could be due to a malfunctioning switch or a stuck relay. Another possibility is an issue with the vehicle's electrical system, such as a short circuit. It’s advisable to check the fog light switch and fuses, and if the problem persists, consult a professional mechanic for further diagnosis.

Yes, you can change the display from miles to kilometers in a 2011 Acura MDX. This can typically be done through the vehicle's settings menu on the dashboard display. Refer to the owner's manual for specific instructions on accessing the settings and making the change. If you have difficulty, visiting a dealership or a qualified technician can assist you.

The 2004 Acura MDX has a bolt pattern of 5x120 mm. This means it has five bolts, and the distance between the centers of two opposite bolts is 120 mm. This bolt pattern is commonly used in many other vehicles as well, making it easier to find compatible wheels.

To change the fuses in an Acura MDX, first, locate the fuse box, which is typically found under the dashboard on the driver's side and under the hood. Use the fuse puller or a pair of needle-nose pliers to remove the faulty fuse, checking the fuse diagram for proper identification. Replace it with a new fuse of the same amperage, ensuring it is securely seated in the slot. Finally, test the electrical component to ensure it is functioning properly.

To eject a CD from a 2003 Acura MDX, press the "Eject" button on the front of the CD player, which is typically marked with an icon of an upward arrow. If the CD does not eject, you can try turning the ignition off and then back on, and pressing the eject button again. If the CD is stuck, you may need to consult the vehicle’s manual or seek professional assistance.

If the radio in your Acura MDX won't turn on, first check the fuse related to the audio system to ensure it hasn't blown. If the fuse is fine, try resetting the radio by disconnecting the car battery for a few minutes and then reconnecting it. Additionally, ensure that the ignition is in the "ON" position, as some radios require this to function. If the problem persists, it may indicate a deeper electrical issue or a malfunctioning radio unit.

The "ERR7" message on a 2002 Acura MDX radio indicates that the radio has locked due to an incorrect code being entered multiple times. When the incorrect code is entered seven times, the system locks to prevent unauthorized access. To unlock the radio, you typically need to wait a certain period or disconnect the battery, and then you can enter the correct radio code. You can obtain the correct code from the original owner’s manual, dealership, or Acura customer service if you don’t have it.

In a 2002 Acura MDX, the control module, often referred to as the Engine Control Module (ECM), is typically located under the hood, near the engine compartment. Specifically, it can be found on the driver's side, mounted on the firewall. Accessing it may require removing some components for better visibility and reach. Always consult the vehicle's service manual for precise instructions and safety guidelines when working on vehicle electronics.

To reset the SRS light on a 2001 Acura, first, ensure the ignition is off and disconnect the negative battery cable for at least 10 minutes. Then, reconnect the battery cable and turn the ignition to the "On" position without starting the engine. Press the SRS reset button, usually located under the driver's side dashboard, until the light turns off. If the light remains on, it may indicate a deeper issue that requires professional diagnosis.

Service code D1 on a 2009 Acura MDX indicates a routine maintenance service that includes an oil change and a tire rotation. The "D" signifies the more comprehensive service interval, while the "1" refers to additional checks such as inspecting the brakes and fluid levels. It's essential to follow this service to maintain the vehicle's performance and longevity. Always consult the owner's manual for specific recommendations and details.

The VSA (Vehicle Stability Assist) light in an Acura MDX indicates that the vehicle's stability control system is activated or has detected a malfunction. If the light is stuck on, it may suggest an issue with the system, such as a faulty wheel speed sensor, a problem with the brake system, or low tire pressure. It's recommended to have the vehicle diagnosed using an OBD-II scanner to identify the specific issue. Addressing the problem promptly is important for maintaining vehicle safety and performance.