Area

One acre has 43,560 square feet. Divide the number of square feet by that and you get the number of acres. This gives you an answer of .298 acres.

You multiply the two numbers to get the area. This would give you 9,000 square feet.

28.27 square feet.

0.8 ft x 0.8 ft = 0.64 ft2 (sq ft)

100x150 = in sq ft.

None.

A centimetre is a measure of length in 1-dimensional space while a square centimetre is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

Acre Loss was created in 2009-02.

The area of Nesle is 7,720,000.0 square meters.

This question cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. A yard is a measure of distance, with dimensions [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

None, since there can be no conversion.An inch is a measure of length in 1-dimensional space while a square foot is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

718,289 square miles in Indonesia

There are 199.5 square feet in a 10.5 x 19 ft. room.

Cannot be done without knowing the composition (most importantly the density) of the sand

5ft x 4ft = 20ft2

423

How much Sq.ft of land in 1 katha land in West Bengal

No. 1550 sq inches.

Cubic feet is a measure of volume in three dimensional space. In the case of a room that requires measures of the length, width and height of the room - that is, three measures. Only two are given in the question and so it cannot be answered.

(952 sq ft x 144sq in/sq ft) /(13x13 sq in) = 811.17 tiles

They are units of measurement of area.

Assume the units for 6's are feet.

First, determine the area of each tile, using the area of the square.

A = s²

= (6 ft)² = 36 ft²

Divide 60 ft² by 36 ft² to get approximately 2 tiles [Even though you won't be able to fit the tiles into that much area! You need to slice the portion of the second tile and include it for the amount of spacing you want to add for the flooring.]

<><><><><>

Second assumption: 6 x 6 means 6 inches by 6 inches

This means you need 4 tiles per square foot, so 60 square feet needs 240 tiles. In practice, the edges of the area don't line up with the area's perimeter, so you might need more than 240 and you might need to cut some.

None.

A linear metre is a measure of distance while a square metre is a measure of area. The two measure different things and it makes no sense to try to convert form one to the other.

Using Imperial measure, 1 Imperial gallon is 0.16 (0.160544) cubic feet.

248 feet

The answer will depend on what is being estimated: the cost of replacement, the mass, the area, the amount of glass, the amount of solar gain, ... The list could go on but since the question does not specify what is to be estimated, the answer can go no further.