0
Civil Engineering
Civil Engineering is a profession of designing and executing structural works that serve the general public, like houses, buildings, roads, etc. A Civil Engineer is an engineer trained in the design and construction of public works, such as bridges or dams, and other large facilities.
4,921 Questions
Why counter forts are provided in retaining walls?
Counterforts are built into retaining walls (and masonry walls in general) to act as a lateral brace and support the lateral loads that building vertical walls generates. This allows the overall width of the retaining wall to remain slim along the entire length (which reduces the cost) but also braces the wall as needed.
Counterforts can also be used to support ancillary elements, such as sidewalks and grade-level improvements, built next to below-grade walls. The counterfort acts to brace the wall and to support the ancillary elements, should the soil backfill placed next to the below-grade wall experience settlement, which is usually inevitable.
Where can foundation by Prescriptives be purchased?
One can purchase the foundation by Prescriptives from their local department store. Other places they can try include a drug store, or online via Amazon.
What is the importance of construction equipment?
Construction machinery is any equipment used in the preparation of the site, construction and fitting out. used in building establishment, demolishing and carrying heavy materials. Their use is vital to save labour time, meet deadline and be able to minimise on cost
Underreamed piles have mechanically formed enlarged bases that have been as much as 6 m in diameter. The form is that of an inverted cone and can only be formed in stable soils. The larger base diameter allows greater bearing capacity than a straight-shaft pile.
These pile are suited for expansive soils which are often subjected to seasonal moisture variations, as also filled up ground and loose or soft strata. They are used in normal ground condition also where economics are favorable.
What is the difference between cutback bitumen and bitumen emulsion?
Cut-back bitumen uses solvent as the mixing medium where in Emulsion uses water to dilute bitumen for the purpose of tack-coating / road works
What is big data in civil engineering?
Big data provides Traffic Engineering and construction companies with a method to collect, analyze, and use extensive amounts of data to help solve business problems and provide critical, informed insight into traffic safety needs of future activities. It helps companies complete projects on time, bid more accurately, and build more efficiently. Big data in construction, however, also poses a significant challenge when it comes to collecting, sharing, and using the data generated across the complex construction ecosystem.
What is the Difference between terrazzo tiles mosaic tiles?
Terrazzo is the blend of marble, glass and natural stone chip tiles in their most basic form. Mosaic is an art form made up of squares of marble, glass, or marble tile cut and spread out on such a flat bonding board.
What measures a structures ability to support a load?
i went on this site to find out the answer not to answer it
What are the nos of steel bars in ton?
Dia /kg /No.s of Bar In Ton 20.025 3314 /4 0.101 829/6 0.226 368/ 8 0.402 20710 0.629 133 /12 0.905 92/14 1.232 68 /16 1.609 5218 2.037 41/ 20 2.514 33/22 3.042 27 /24 3.621 2326 4.249 20 /28 4.928 17/30 5.657 15 /32 6.437 1334 7.266 11 /36 8.146 10/38 9.077 9 /40 10.0578
An engineer's scale is a special kind of ruler used in engineering drafting, such as for blueprints. The scale helps to make drawings that are a certain ratio of the size of the original. For example, 1:10 scale would produce a drawing that is one tenth the size of the original object.
Unfortunately, SCP Foundation is real. It's created on 19 January 2008.
But but but, SCP foundation is NOT totally real. It's just a website where they create "creatures". They write information about them.
SCP Foundation and their "creatures" can be found in a lot of horror games or un-horror games.
Non suspended concrete slabs sit on the ground directly. They are different from suspended slabs because suspended slabs are above the ground and are supported by beams.
Beams fail in many ways; two categories are, stability failures and strength failures. Stability failures usually relate to structural systems, whereas strength failures relate to the members comprising a structure. Of the many ways which a beam can fail, bending is a very common one.
description of fatigue and how it can be controlled
Which reservoir does Brunswick get its water from?
The reservoir that Brunswick gets it's water from is a new dam and reservoir. It is called the Tower Road Dam and Reservoir. It was built to help the Moncton Reservoir to supply water to the community.
Where is the deepest basement in the world?
Here at the University of Minnesota (Minneapolis, USA) the Civil Engineering building has basements marked 1 through 7. 7 is a fully functioning floor with a public commons. I am posting this from there now. It is one of the deepest basements in our local area. But I am also looking for a so-called "underground skyscraper" but so far have not found any.
What size of Concrete foundation for 40 KW diesel generator set?
1.Do not install the Gen set on the loose send or clay.
2.Foundation should be designed considering safe bearing capacity of soil.
3.The length and breadth of foundation should be at least 300mm more than base rail length and breadth respectively.
4.Ensure that the concrete is completely set and cured before positioning the genset.
5.It is recommended to have foundation height about 250-300 mm above ground level, it help to maintain cleanliness of genset.
6.Foundation should evenly flat diagonally as well as across the length. Ensure complete base rail should be rest on foundation and no gap between base rail and foundation.
7.For roof top installation ensure that the load of D G set is completely transfer on pillar and beam structure & please consult structure engineer for more details.
Regards - Anoj Kumar Jain
What is the frost depth line in Youngstown Ohio?
in western pa the frost level is 3 ft. In New wilmington pa. just out side sharron
How do you use an anvil to bend sheet metal?
The various parts of the anvil allow you to form hot metal in a variety of ways. The horn allows the forming of curves and circles. The face allows the straitening of metal or small depressions using the hardie and pritchel holes. The table can be used to start bends and the sides to make corners
Difference between shock loss and friction loss?
Friction loss is the loss of energy that occurs in pipe flow due to viscous effects generated by the surface of the pipe. Shock loss is an huge loss that causes an adverse effect on an insurerâ??s assets.
What is the allowable limit of slenderness ratio in aluminum?
You have to know that the slenderness ratio only takes into account the shape of the column. So because of that, the slenderness ratio is the same for steel, aluminium, wood, etc. The formula KL/r where K is the equivalent length factor, L the length of the column and r the radius of gyration which is sqrt(I/A), should always stay under 200. If not, you must redesign...
Different types of bricks sizes strengths absorption costs etc?
how long is a standard building brick
What percentage of Ash used in cement?
- About 10-25 % by weight of ashes can be used in cement.
- Ash is generally a replacement material in cement.
- Some of the ashes addes in cement are volcanic ashes, fly ashes, blast furnace slags.
