Computer Printers

I found this answer in a dictionary:

# ## A cylinder of wood, plastic, cardboard, or other material on which wire, thread, or string is wound. ## The amount of wire, thread, or string wound on such a cylinder. ## Something similar to such a cylinder in shape or function. # A reel for magnetic tape.

I hope this helps answer the question.

I found the following solution at:

http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

...and it worked!

maybe if you go there you can read better. For Lexmark printers, follow until the very end. NOTE: Dell printers are made by Lexmark and have the same issue!)

How to clean up printer drivers

If the Print Spooler service fails when printing, when Windows starts or it can not be restarted, the usual reason is that one or more printer drivers is defective. If the Print Spooler service is not running, the Printers and Faxes folder will be empty and you can not use it to remove (or add) printers or printer drivers. If you have a Lexmark or Dell printer, see special information about Lexmark printer drivers.

It's important to only install printer drivers that are designed and built specifically for the Windows version you have. This is particularly important for Windows XP; many of the CDs and floppy disks distributed with printers (particularly older models) do not have Windows XP drivers - check the printer manufacturer's web site for printer drivers for the version of Windows you have (see Links).

A common cause of printer driver problems is to upgrade to Windows XP from Windows 95, 98 or ME without first removing the printer and the printer drivers.

The steps on this page will remove all printers and printer drivers from the computer. The printing subsystem is then "clean" and ready for printers to be added using printer drivers specifically for the Windows version you have.

If you have drivers for several printer models installed (e.g. on a Print Server computer) it may only be necessary to remove the defective printer drivers. At steps 2, and 7, just delete the entries for the printers or printer drivers you suspect are defective. Unfortunately, the files that comprise the drivers are all in the same folder. Also, the same files may be used by the drivers for several printer models. So, selectively deleting the driver files at step 12 may be difficult or impossible. With Windows 2000 and XP, in most cases, deleting the registry entries for the drivers (step 7) will be sufficient, so you may want to skip steps 10 through 12 if you have multiple printer models and don't want to re-install all of them.

Check in Control Panel, Add/Remove Programs; if there is an entry relating to one of the printers, select it, then click Change/Remove. Follow the dialog and "uninstall all" or "remove all" as appropriate. Some "printer software" have programs that show up here and it will be a good idea to remove those before going any further.

If the Print Spooler service is operational:

1.

Open the Printers (Printers and Faxes on Windows XP) folder 2.

delete all of the printers 3.

click File, Server Properties 4.

select the Drivers tab 5.

for each entry: 1.

select the entry 2.

click Remove

Usually, this will do a pretty good job of cleaning out drivers with Windows 2000 and later (not so with Windows NT 4).

If the Print Spooler service is not operational, or you want to make certain there are no printer driver remnants, either follow the instructions below or use cleanspl.exe from the Windows 2000, XP or 2003 Resource Kit (http://www.microsoft.com/downloads/details.aspx?FamilyIDen). cleanspl.exe from the Windows 2003 Resource Kit tools will work on Windows XP.

Some information about cleanspl.exe:

*

cleanspl.exe does a very thorough job of cleaning up the print spooler stuff, but it does not remove the spooler service dependency on the Lexmark service (see special information about Lexmark printer drivers. *

You can use it to clean up the spooler stuff on another computer (i.e. remotely). *

When you run it, it asks you if you want to remove some things that are actually delivered (and installed by default) with Windows. In most cases, you should answer No to the corresponding prompts (you don't want to remove the Standard TCP/IP Port or the BJ Language Monitor).

Here's how to clean up the print spooler stuff if cleanspl.exe is not available or you prefer to do things manually.

Warning! be very careful using regedit - if you delete the wrong things, you may render your computer inoperative!

6.

open regedit (e.g. click Start, key regedit and press Enter) 7.

navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers

under this key, there will be the keys Version-2 and Version-3 (one or the other of these may be absent - not a problem)

the sub-keys under these contain the printer driver configuration information

delete all the sub-keys inside Version-2 and Version-3, but not these keys themselves

The Microsoft Knowledgebase article at http://support.microsoft.com/default.aspx?scidkb;en-us;324757). The steps below make the print spooler service only dependent on the Remote Procedure Call (RPC) service (RPCSS), which is normal. The print spooler service dependencies are stored in the registry at

HKEY_LOCAL_MACINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

The sc config command at step 16 resets the value of that entry.

15.

Open a Command Prompt window 16.

key the command sc config spooler depend but not before) 17.

restart the print spooler (see steps 8 and 9 above)

Interest on the loan is not tax deductible.

The "investment" might not increase in value at all, or if it does, will probably not increase as much as other possible types investments. Therefore, do not consider it an investment. It is a pre-payment of future vacation costs, and as such might very well be a worthwhile expenditure. But it is not an "investment" in the usual sense.

Ask about costs for "maintenance" or common area expenses. These expenses will be payable every year forever in addition to the original purchase price. They will increase every year and will be payable whether or not you actually go to the place in any year.

You will be guaranteed a place to go each year. This is an obvious advantage, and probably the only one.

----------------------------------------------------------------------------------------------

Time-sharing can be an affordable way to own a vacation home. Before you buy, you should be able to answer YES to all these questions:

• * Are you POSITIVE you want to spend ALL your vacations there?

*Have you visited the facility? Are you satisfied with its quality, with the stability of the management, and with the terms of the contract? Have you checked out this time-share development with the Better Business Bureau, the Attorney General's Consumer Protection Office or your Legal Assistance Office? *Have you talked to some long-time owners in this time-share facility? *Can you afford both the facility and the round trip travel costs each year?

DO NOT BUY IF:

* You want to rent out the facility.

* You plan on reselling it.

* You plan on exchanging vacation sites frequently.

BUYING TIPS

BEWARE OF ANY PROMOTIONS THAT:

• * Will not physically take you to the facility. (Some promoters claim the place is built when it is really only a hole in the ground.)

* Offer you a special price "for that day only."

* Subject you to a long and harrassing sales pitch.

* Will not let you take the contract home to study.

DO NOT SIGN A CONTRACT ON THE SAME DAY AS THE SALES PITCH.

If the price is fair, it will still be in effect the next day. Many people readily admit they became much smarter the day after they signed a time-share contract.

It is important to know first if timeshare is what you really need. The location, the type of timeshare, the period of time and the timeshare resort or company will considered later.

They are just to Trouble you ,

No other difference in shape size and mechanical but they will only work for the said printer

Could not understand why Samsung makes it - to confuse the client ?

If somebody buys it by mistake , then your life is mess , its costly and non replacement, if you opened it

:-D