Flooring

28 square feet. This is an easy calculation - just multiply the length by the width. The answer is the number of square feet.

Looking for the answer all around. Spent hours on the net and just cannt find it.

Paint thinner will take off the oil based paint, but first test it in a corner to ensure it will not damage the face. Glazed tile shouldn't be damaged from paint thinner, but you would want to be sure.

The spacers allow you tomaintain the 1/4" space from the wall required for natural expansion and contraction of the flooring. This occurs from changes in humidity and its affect on the wood products (MDF board) that laminate is made from. Without spacers, you would have to eye the space making it very difficult to be accurate.

A carpet extractor puts water over the entire carpet and pulls it back out and in theory the dirt and stains with it. A spot cleaner is meant to clean small stains.

Generally no. Wall tile are often made of material with low PSI ratings. These ratings tell how much pressure per square inch a flooring can with stand. Being made to go on the wall, they only need to be of marginal strength. This isn't always true, but that said, 95% of the time, wall tile cannot be put on the floor.

Not reccommended. It typically wont handle the traffic, and will end up cracking on you

Not really as wall tiles are usually highly glazed and would be VERY slippy if they get wet, there also usually a different clay background and not designed to be stood on. Hope this helps

When the VCT is old and worn.

When there is possibility of staining.

When there is high traffic.

When you want the floor to really shine after applying floor finish over 2 coats of sealer.

Porcelain is a man made glazed product. It is fired at a hightemperature and made with consistent colors and textures. They are generally non porous because of the glazing process, also strong, and made in many styles. Porcelain is best cleaned with a simple vinegar and water solution. Grout lines can be as large as 1/2" and as small as 1/16". Tiles are often quite large, 20 x 20 giving a different look. Granite tiles are a natural product. Cut from granite deposits, it can vary greatly from one tile to the other. High quality granite is quite strong, but cheaper tiles can be highly prone to breaking. Granite, especially green granite, are very moisture sensitive. Also, being natural stone, it is a porous tile, and will need sealing regularly. The grout for granite must be non-sanded, making grout joints 1/8" or less only. Still, granite is a very elegant look, but a lot more up keep.

Once all the solvent in the product has evaporated and it has cured the smell will be gone, until then just ventilate the room, it will help it dry faster too.

The glo products are similar to putting wax on your floor, except that they are also expected to clean the floor. Periodically, you'll need to remove the old glo product buildup by using an ammonia solution.

Yes, with a stone cutting blade, but it would have to be a blade made to cut while dry and it would be a slow process with lots of dust.

yes, but real linoleum is treated periodically with oil to maintain elasticity and must be cleaned with degreases. most modern floors are vinyl and can be cleaned easier. Follow the directions for installing the tile.

Yes. Water can easily warp a wood floor. Electric steam cleaners say they are safe on sealed wood floors, but steam will penetrate in between the seams of the boards and in time causing damage that is not reversible.

The best products are alcohol based because they evaporate quickly.

Under no circumstances should a steam cleaning devise be used on a hardwood or laminate floor! Steam is essentially hot water. Water will damage your beautiful wood flooring. Consumers should contact their flooring manufacturer for safe cleaning methods and products.

The amount of tiles that will be needed will depend on the size of the tile. Example: if you are using a 12" x 12" tile and you have 168 SF to cover than you will need 168 tiles. If you are using 24" x 24" tile than you would need 84 tiles to cover 168 SF.

Always remember to allow about 3% to 5% for waste or attic stock...... if the tile gets damaged before installation or if after the installation a tile need to be repaired you will have the additional tile to complete it....FYI tile is die lot sensitive. The same tile you buy today could look different if it is not made from the same run

From 1st to 4th is 3 floors so 48/3 = 16 seconds per floor. So 16x4 = 64 seconds from 4th to 8th floor.

70 square feet. Multiply length by width - the result is the area in square feet.

with an iron, you can use just a regular clothes iron. but just don't let it set too long on the laminate, same effect your clothes get if you do this.

There are 9 square feet in one square yard. Therefore, 30 square yards is equal to 30 x 9 = 270 square feet.

Im gonna give you the less obvious answers since its pretty easy to make small projects like boxes and such with 10bf. You can build chairs, stools, small end tables, etc. All you need for these are legs, tops, and in the case of some end tables a drawer.

To cover the holes in your laminate where the faucet was, consider using decorative hole covers or grommets that match your countertop color. Alternatively, you can use a piece of matching laminate or a decorative adhesive patch to create a seamless look. If the holes are large, a plumber's putty or silicone sealant can also be used to fill them, ensuring it's smooth and even. Lastly, if aesthetics are a priority, adding a small plant or decorative item can help disguise the holes effectively.

xpgc7

28 x 25 = 700 (700 square feet)

dafsdfa

168 (square feet) = 15.6077107 square meters http://www.google.com/search?hl=en&safe=active&rls=com.microsoft%3Aen-US&q=convert+168+square+ft+to+square+m

A radiant electric system heats a house by using electric heating elements installed in the floors, walls, or ceiling to generate heat. These elements radiate heat directly to objects and people in the room, warming them up. The heat is emitted evenly and efficiently, providing a comfortable and consistent temperature throughout the space.