Glue and Adhesives

It all depends on the "Glue". Real glue is made from animal skin and water, so, no, you will not die from smelling it.

Other adhesives use some pretty harsh chemicals, and, yes, you can die from inhaling the fumes of some of them. Others may have fumes that, when smelled, will only do permanent brain damage. Some may have temporary effects. The trick is to know, for sure, which one you are sniffing.

No.

Flour does not dissolve with water.

So they do not form a solution.

You can try using a mixture of warm water and dish soap to gently scrub off the glue from the paper label on the beer bottle. Alternatively, rubbing alcohol or vinegar can also help dissolve the glue. Simply soak a cloth in the solution and gently scrub the residue until it comes off.

Wood glue typically does not dissolve in water once it has dried and cured. The water-resistant nature of most wood glues helps them maintain their bond even when exposed to moisture. However, prolonged exposure to water can weaken the bond over time.

No It won't . You should not put any glue in a cooking implement that you are going to heat up anyway.

There are many kinds of glue for wood. Generally, yellow or light-brown wood glues will provide the strongest joint.

Titebond is a general purpose glue that is a good choice. Titebond III is more waterproof, and has a longer "open time", meaning you have more time to assemble parts, handy for complex assemblies.

Elmer's White Glue (Glue-All) is nearly as strong as Titebond for wood, is more widely available, and is said to have a longer open time than Titebond III.

I just learned about Titebond Extend glues, which have an open time of 15-20 minutes.

Resin glues (Gorilla) and epoxy have longer open times yet, but have much longer setting time, so your clamps will need to stay in place longer - maybe 18 hours.

There are a lot of opinions on the subject on the many woodworking forums - just search for some of the terms of interest.

To defeat Goop, focus on attacking its weak points which are usually its head or core. Use attacks that can penetrate through its gooey body, such as fire-based or acid-based attacks. Continuous and powerful attacks can overwhelm and eventually destroy Goop.

Sticky tack, also known as adhesive putty, is typically made from a synthetic rubber compound that is moldable, reusable, and non-toxic. It is designed to stick without leaving any residue and is commonly used for temporary mounting or hanging of lightweight objects.

You can remove crazy glue from metal by soaking the affected area in warm, soapy water and gently rubbing the glue to loosen it. Alternatively, you can use acetone or nail polish remover to dissolve the glue from the metal surface. Be sure to test the acetone on a small, inconspicuous area first to ensure it doesn't damage the metal.

You should use a specialized acrylic adhesive, such as a solvent-based acrylic glue or a two-part acrylic adhesive. Regular super glue or epoxy may not create a strong bond with acrylic surfaces. Make sure to follow the manufacturer's instructions for best results.

One common glue that is not made from animals is PVA glue, which is a synthetic adhesive made from polyvinyl acetate. This type of glue is widely used for various applications such as crafts, woodworking, and general household repairs.

The sticky price theory suggests that prices do not adjust quickly to changes in demand or supply, leading to temporary imbalances in the economy. This can result in periods of high unemployment or inflation as prices and wages adjust slowly.

Wet sanding may remove some glues in someconditions. However I've found dry sanding more effective with most adhesives. It depends very much on the exact 'glue' in use here.

The idiom "sent to the glue factory" is a metaphorical way of saying that someone or something has been discarded or disposed of in a harsh or cruel manner, usually due to being no longer useful or valuable. It is often used to describe a situation where a person or thing has been replaced or rendered obsolete.

Depends on the type of plastic. Many plastics have glue made from their solutions. Some can be partially dissolved and joined together by the right chemical, some needs to be prepped with an etching agent to get a glue to stick to them.

Adhesion comes to mind. One to argue for cohesion, too, since glue sticks to glue in some applications.
Adhesion, perhaps? "van der Waals forces" is another possibility. Ultimately, it's a form of the electromagnetic force. None of the other three forces that made up the four known forces participate at all. nope i am lieing
ADHESION
adhesion is the technicle name

Adhesive water refers to water that forms hydrogen bonds with a surface, allowing it to adhere or stick to that surface. This property is often seen in adhesives and helps them bond or stick to different materials.

Cyanoacrylate, often marketed as super glue or Krazy Glue, is a type of glue that is not flammable once it has cured and dried. It forms a strong bond between surfaces but is not suitable for high heat applications.

Resorcinol-resin glues are commonly used for bonding wood, plywood, and laminated materials in applications where high strength and durability are required. They are especially suited for outdoor applications due to their resistance to water, heat, and chemicals. Additionally, they are often used in boat building, timber construction, and aircraft manufacturing.

Hot glue has been used for many centuries, the first hot glue was made by finely grating animal hooves together with a mineral spirit and heated in a double boiler, when soft it was used to glue wood and other porous materials.

the glue gun was a natural evolution from the double boiler, it has made the use of hot glue very easy and quick. by the way, they make use of synthetic glue and no longer use animal hooves.

One way to remove super glue from a metal padlock is to soak the affected area in acetone or nail polish remover. Allow it to sit for a few minutes, then gently scrape off the softened glue with a plastic scraper or a flat-edged tool. Repeat the process if necessary until the glue is fully removed. Be careful to avoid damaging the metal surface of the padlock.

If you have a white or clear sticky discharge in your underpants it's normal its just wetness it has very little smell if it has a strong oder or is green see your Doctor immediately you might have an infection

Glue typically has properties such as adhesion, cohesion, viscosity, and drying time. Adhesion refers to its ability to bond materials together, while cohesion refers to its ability to stick to itself. Viscosity determines how easily the glue flows, and drying time affects how quickly it sets and bonds materials.

To remove sticky residue from tape, you can use rubbing alcohol or a mixture of equal parts baking soda and oil (like coconut or olive oil). Apply one of these solutions to the sticky area, let it sit for a few minutes, then gently scrub with a cloth or sponge until the residue comes off.