Glue and Adhesives

Glue sniffing can be dangerous because the fumes can cause dizziness, confusion, and nausea. Long-term use can lead to brain and nerve damage, as well as damage to the heart, liver, and kidneys. It can also be addictive and lead to harmful behaviors to obtain and use the glue.

The sticky adhesive on tape is typically made of a mixture of natural or synthetic rubber, resins, and other chemicals. These ingredients help the adhesive stick to surfaces and provide the tape with its sticking properties.

Glue is not typically recyclable due to its chemical composition and potential contaminants. It is best to dispose of glue in the regular trash to avoid contamination of recyclable materials.

To create an investigatory project using onions or garlic to produce a glue, you can extract the juice from the onions or garlic and mix it with other compounds like vinegar or sugar to enhance its adhesive properties. Test the glue on different materials to determine its strength and durability compared to commercial glue products. Document your process, results, and conclusions to present in your investigatory project.

Glue is typically neutral, meaning it is not acidic or basic. The pH level of glue can vary depending on the type and ingredients used to make it.

To build a roller coaster using craft sticks and a hot glue gun, start by designing the layout of the coaster. Use the craft sticks to create the track and support structure, securing them with hot glue. Be sure to test the coaster as you build to ensure it functions and can support a small toy car. Add loops, curves, and other elements for excitement.

The ingredients in glue can vary depending on the type of glue, but typical ingredients include water, polyvinyl acetate (PVA), resins, preservatives, and additives like fillers or stabilizers. Some glues may also contain solvents or chemicals to enhance bonding properties.

When you mix borax, water, and glue, you create a substance called slime. The borax acts as a cross-linking agent that binds the glue molecules together to form a slimy, stretchy material. This simple experiment demonstrates principles of polymer chemistry and allows you to create a fun, squishy toy.

For real dark wood they have a black CA glue (instant glue) or medium viscoity clear for light color wood, this is usually used in inlaying, but can be used in laminations, keep in mind this glue does not flex. To be safe, I would use 30 minute Epoxy, (30 min. is for time placement), If its not a large glue-up, and if extended time is not needed 5 minute epoxy will do just fine. Good-Luck

Most glue is sticky to the touch, as this is part of its function. However, various glues and adhesives may not feel sticky, and only adhere through the addition of heat (hot glue), moisture (envelopes), or pressure (glue dots).

Depends on the type of board being manufactured. Here's a site which describes current skateboard manufacturing techniques -- there is an entire section dedicated to glues used in manufacture: http://www.transworldsnowboarding.com/twbiz/industrynews/article/0,21214,704614,00.html

No, the two tubes that form a glue typically act as a packaging and delivery system for the components of the glue, which then react once they are mixed together. The individual components of the glue inside the tubes are the actual reactants that form the adhesive bond.

Rubber cement is a type of glue that is oten used in gluing paper, because it is not water-based, and therefore does not ruin the paper.
Rubber glue is an elastic polymer mixed with a solvent like acetone. When it's applied, the solvent dries out allowing the glue to harden and adhere.

"Tuck" -red construction tape. Available in most building products stores and of course HD.

Sticky notes are commonly used for jotting down quick notes, reminders, or to-do lists, and then easily sticking them to surfaces like desks, walls, or monitors as a way to visually organize information or tasks. They are a popular tool for brainstorming, planning, and keeping track of important information in a visible and convenient way.

To remove hot glue from brick, you can try heating the glue with a hairdryer or a heat gun to soften it, and then scraping it off with a putty knife or a similar tool. You can also try applying a small amount of rubbing alcohol or acetone to the glue to help loosen it. Be careful not to damage the brick surface while removing the glue.

The Polyvinyl acetate that it is made from gets stickier as it dries. This is the operating principle of this adhesive.

you get a microwaveable bowl put 2 tablespoons of flour in then add water till it makes a soggy dough or 2 teaspoons of water and then put it in a microwave for 45 seconds based on a 800 watt then squish in your hand very hard then leave for 1 hour

option 2:

take a glue stick and roll it out until the amount of sticky tack is desired. then leave it in a container for 5 hours. after that, cut off the glue with scissors and roll in baby powder

No, glass is not a metal. Glass is a type of amorphous solid made from heating and cooling a mixture of silicon dioxide, soda ash, and lime. Metals, on the other hand, are elements that typically have high electrical and thermal conductivity and a shiny appearance.

I don't know, why does it? My face doesn't get sticky, if I were to have to guess I would think the salt and moisture from your tears... yeah i would say when the water evapourates the salt wouldn't so the salt would stay there...

Toxic fumes. Not cyanide, but a handful of other nasty things, and you don't want to breathe them. Heat and cyanoacrylate adhesives (CA's) don't do well together. The fumes can cause the eyes to burn and can also temporarily blur vision. The fumes can irritate the respiratory track, and can cause coughing fits. Burning CA's generates a big handful of partial combustion byproducts. And they should be avoided.

Sticky resources refer to assets or components that are kept in memory for fast access, reducing the need to reload them repeatedly. This can include images, scripts, or data that are temporarily stored to speed up performance and improve user experience on a website or application.