answersLogoWhite

0

🏢

John Deere

John Deere is the leading manufacturer of agricultural machinery in the world. Questions about John Deere products and their proper operation can be asked here.

2,566 Questions

How do you change carburetor in John Deere LT133?

unscrew the air filter on top of the carb. It is a triangular shape box in the top left front of the motor. Unclip the black fuel line. Unscrew the carb from the head. There are two rods that go to the throdle body and the other to the choke( i think)/ you have to be carefull not to bend and twist these 2 rods. Just kind of wiggle them out of their hole in the carburetor by moving the carb around the cables. Once free replace the gasket and reverse these procedures

Will a 60 inch deck from a john deere 420 work on a 318?

Not supposed to, the 318 was designed to have the 46 in or the 50 in deck on it. The 60 in decks mounting hardware that was used on the 420 is not the same. But if you can get it to work, good luck.

How long has John Deere been in business?

The company was founded in 1837.

For the source and more detailed information concerning your request, click on the related links section (Wikipedia) indicated directly below this answer section.

How do you attach 42 snow blade on a John Deere 212?

I think that you probably are not having trouble attaching the main blade part to the tractor. It's fairly straight forward. Set the blade bottom pins in the corresponding ones on the front of the tractor, swivel the blade mount until the top spring pins are aligned and release the spring pins. Then you have to connect the positioning lever on the side of the tractor. There is a bolt with a half-moon slot under it. Remove the bolt, place the bottom of the handle brace in the slot and reinstall the bolt.

What you are probably having trouble with is the fact that your tractor does not have a lift kit installed for anything other than the deck. You need to purchase and install the kit that connects the lever on the side of the tractor with the blade lifting lug in the front. As far as I know, the kits are only available through John Deere, so you have to pay the green paint tax. :) That should be it.

How do you adjust the clutch on a John Deere 2240?

On a John Deere Model A (with the tractor not running), start by removing the dust cover from the clutch with a flat head screwdriver. You should see three nuts holding the clutch mechanism together. Tighten these three nuts equally and check how well the clutch works often after you have tightened a little ways. There should be a distinctive "pop" when you snap the clutch in or out. After you are content with the how the clutch works replace the dust cover. This adjustment should help prevent clutch slippage in most cases but for more information on adjustment and possibly rebuilding, I recommend you buy a repair/service manual along with an operator's manual.

How do you operate John Deere traveling 4010J?

Simply lay out the hose where you need water, and the sprinkler will follow it to deliver water right where you want it.

Where to find fuse on stx38 mower?

Under the RH wheel well next to the starter switch

Where can you buy John Deere parts?

JD Parts has a manufacturer website (jdparts.deere.com). If you navigate and click on the home tab on the far left you will see a Hon Deere parts catalog. Alternatively if you know the part number you require you can enter it under the catalog. Be sure to know the model number of your tractor.

Why does your john deere la145 have a lack of power when warmed up?

It's not a 'lack of power'. It's the hydrostatic transmission limited on how fast it rotates to power the drive wheels

What is the fuel efficiency of a semi truck?

The average fuel economy of a semi truck is between 5 and 7 mpg when loaded.

Where is the serial number on a john deere 755 trator?

The serial number plate is at the rear, under the PTO shaft.

What company makes the best lawn tractor?

According to multiple research web sites, John Deere ranks in the top spot for best lawn tractor. Other brands such as Toro and Ariens are ranking in the top 10.

What is your john deere z225 eztrak zero turn mower worth?

As with any mechanical item, condition is everything. If everything works properly, no accessories are missing, and the hours of use are low, it will be worth more than one that has been left out side a lot, has high hours, is missing parts, etc. It also makes a difference depending on which deck size, engine options, and other items you may have purchased with it and would be selling with it. Since you don't mention any of those things, it's really not possible for anyone here to give you a rough estimate.

How do you Change the traction drive belt on a x300 john deere?

It helps to have a schematic in changing the traction drive belt on a x300 John Deere. Making the area accessible can be tricky. Once it has been revealed, it can be accomplished simply.

What is the cost of a John Deere Gator hpx?

The cost of a John Deere Gator HPX will vary depending on which country one is purchasing from. In the United States they can be purchased for around $5000 to $7000.

Who makes john deere mowers sold at lowes?

Contrary to what most people think, those lawn tractors are made by John Deere at the Horicon Works in Horicon, Wisconsin

Were is the time delay module for john deere 425 lawn tractor located?

If you are sitting on the tractor seat (hood up and side panels removed) the time delay module is on the lefthand side (starter side) of your JD 425. The original module is square and the new one is round.