0
Mazda
Founded in 1920 by Jujiro Matsuda as Toyo Cork Kogyo Co., Ltd, Mazda Motor Corporation is a Japan-based automotive manufacturer that sold over 1 million vehicles in 2007. Some of the popular vehicles manufactured by the company are Spiano, AZ-Wagon, MX-5/Roadster, RX-8 and BT-50.
1,848 Questions
Does the Mazda 626 and the Ford Probe gt have the same motor?
Yes both the probe gt and Mazda 626 have exact same engine and equal power, 24valve DOHC V6.
It is a triple rotor Rotary engine. A b2000 was there pickup.
What kind of oil do you put in a Mazda 3?
depend on the year of the car. most would take 5w20. new models ask for 0w20
Where is the rear window washer fluid reservoir on a 2003 Mazda Protoge5?
The rear window washer system shares the same reservoir with the front window washer system. This shared reservoir is located just behind the right side headlight. There are just two separate pumps mounted in the bottom portion of the same reservoir.
If a 1987 b2200 Mazda timing belt broke could have bent valves?
Those are not listed as interference engines. It is always possible given the correct conditions but when they are not listed as interference it's normally pretty rare that it happens. Should be able to just replace the belt and go again on that one.
The Chairman of Mazda cars is jujiro Matsuda and the CEO is Takashi Yamanouchi
Which wheels fit the Mazda B2200?
Mazdatruckin.com has a page in their tech section with a collection of rims their members have installed on their truck with pictures and additional notes. See the link below. I had Chevy 6 lug rims (the same set) 15 inch on a 82 datsun ,95 Mazda,and,a 2000 Nissan the rims outlasted the trucks.
1994 Mazda b4000 will not charge gauges wont work replaced alternator still not charging ECU?
this is not the ECU!! this is a bad fuse or fuseable link, very likely a problem in the wire harness. bad connection. ect. Sorry no easy replacement with your problem. It maybe a relay. but not likely. you need a cheep mulitmeter. for me to help you (need mor info)!! look for rusty pin conectiors (green in color). with your meter check that you get 12.5 volts to your alt. on the two small wires. and big one to. I bet you are not getting voltage to your regulator ( in the alt.) this is the small wires! if you jump 12 volts to the small wire e your alt. wil work this time only. trace this wire back to find your problem. hope this helps ya best of luck! a working alt. will produce 13 plus volts but only when the regulator is entergized!! in the small wire!!!!!
How do you retract the piston on the rear brake caliper of a 1994 Mazda lantis model E-CBAEP?
this should be the same caliper as the cronos, mx 6 and eunos 500. Behind the caliper there should be two 14mm bolt look for the one directly behind that piston,remove that bolt and usin a 4mm Allen key in that space you could adjust that piston. that should work!
Change plugs on 1996 Mazda b2300?
The Mazda 1996 B2300 4 cylinder engine has 8 spark plugs. Looking at the ending from the front of the truck, there are 4 on the right side and 4 on the left.
The 4 on the left are easily accessed by removing the spark plug wires. You may also want to remove the air intake duct work if it makes things easier. The 4 plugs on the right side are a different side. The throttle body intake header mostly blocks access to these plugs and should be removed first. However, if you have enough patience and swivel sockets, you can remove and replace the 4 right side spark plugs without removing other parts first.
When to change the timing belt on a Mazda demio?
Rule of thumb for cambelts is 4 yearly or 100,000km
which ever comes first.
However, I recommended you check with the manufacturer
as some cars have a tendancy to break belts earlier than 100,000km.
What is the gas tank capacity for 2010 mazda3?
If your
in Canada 55 litres and if your in the states 14 gallons. If should also tell you this in your owners Manuel.
mazda 2000 1986 have to hold key to on to keep running when starting
Ford Motor Company owns a percentage of Mazda, and some plants produce both Fords & Mazdas. Some parts are interchangeable.
Where is the PCV valve located on a 2005 Mazda 6i with a 2.3 liter?
It is located under the Intake Manifold. You must remove the intake manifold to get to it.
Disable the seatbelt warning chime in the Mazda CX7?
1. Car off, all belts unbuckled, parking brake on
2. Turn key to on position. you will see seat belt warning light light up red
3. After 1 min you must buckle and then unbuckle seat belt you want to disable warning for 9 times exactly and finish doing this within 50 seconds of the light going off
4. Airbag light will go on for 3 seconds or so
5. After it goes off, buckle then unbuckle seat belt again 1 time
6. Light will flash, seat belt warning disabled.
Your Mazda hesitates up hill and on turns anyone know what it could be?
Not sure, but it sounds like a weak fuel pump or clogged fuel filter . If the fuel pump is located in the tank, gas could be sloshing around on turns and inclines a weak fuel pump would have a hard time picking the fuel up. hope this help
How do you use scan on Mazda 92 b2200?
The B2200 does not have "scan tool" capability. It does have a diagnositics port that can be used to throw out codes using the MIL light in the dash. There are about a dozen codes that at best tell you the obvious. There is lots of help on mazdatruckin.com that can help you diagnose your truck.
