Remote Control Devices

Connect the supplied anttena on the reciever. Once you have done that, then:

1. dtv symbol device

2. press and hold MUTE & SELECT for two blinks

3. enter 9 6 1

4. press CH UP

5. enter the last 6 digits of the Receiver ID #, found on a sticker in the access card compartment

6. press SELECT

Now the receiver will accept both IR and RF, but the directv device on the RC32RF remote will only emit RF signals. The av1, av2, and tv are all still IR only.

unfortunately you can't. I have the same problem, moving house, i lost it. i gaffed around for a long time, but in the end, after scouring the depths of the tinter web and a few calls to phillips, they told me i could either purchase another remote from the at £19.99 (GollyGosh) so instead i took me off to telcos and picked up a cheap universal remote and it worked oki doki!

I have the 32" TCL and the 645 code worked with the 722 dish network dvr remote (remote 20.0 IR). For that remote, press and hold tv button until all device buttons light up, enter 645 and press # key.

5105

thin small outline package

You can either look on ebay, the companies website or just buy a universal remote .

It is worth around 500 dollars.

There are a variety of places that one can purchase a remote control robot. RadioShack is one location that offers sales on remote control robots. Another place where one could purchase a remote control robot is Walmart.

sdsfd

You can go directly to the Samsung website and type in "owners manual" in the search. It will take you to a page that allows you to use the drop down boxes to enter your product info and then download the correct manual for your TV. The website is: www.samsung.com

Toys R Us sells a remote control spider made by Animal Planet. The remote control spider can climb walls and is available at Toys R Us online or in stores.

If the harmony website doesn't have a device listing for your fan, then you need to learn it. With the remote plugged in, and the harmony software running, you can select 'learn new command' somewhere in the menus. When it asks you to, point the original ceiling fan remote towards the back of the harmony, and teach it the buttons you wish to use. If you don't have the original fan remote, you may not be able to control it.

Actually the main problem here is the 880 is not an RF remote and the Triton is an RF Fan.

I use URC products so I am not sure what Harmony offers other than upgrading to the 890 remote.

All you need to do is get something to translate your IR remote signals to RF for the fan.

what year was the remote control invented?

First some background, some remotes use a 5 digit code, some use a 4 digit code. This is because some remotes automatically put in the first 1, some don't. So you may have to try these codes twice, once with all 5 numbers, once with only the last 4 numbers. The codes I have listed for HP are: 11088, 11089, 11101, 11494, 11502, 11642

What are the possible universal remote codes for a Cisco 4640 cable box

Assuming you are asking about the universal couplings (joints) in the drive shaft, these joints are needed because the engine is fixed to the vehicle's chassis (frame) whereas the wheels are suspended from the chassis. This means that the wheels able to move relative to the engine and transmission, so there must be a mechanism that accomodates this movement. This is most commonly done with u-joints in the driveshaft on rear-wheel or four-wheel drive. On front-wheel drive, this is often done with CV-joints.

I have a electron tv. I bought yesterday a record enregister videotron but it is not compatible. There is no code. What can I do?

Without knowing the remote model number, I would do this: To do a brand code search for Sharp: Manually turn on the TV. Hold down the "TV" button on the remote....while holding it down also hold down the On/Off button on the remote for 3 seconds. Release both buttons. Press the number 6. The TV light on the remote should blink once. Press the On/Off button on the remote repeatedly until the TV turns off. When the TV turns off, press the STOP key on the remote to save the code. That should be it.

An RCA Universal Remote can be purchased from a wide range of local and online retail stores. For a local Purchase a number of the "Big Box" retailers such as Wal-Mart, Best Buy and Target carry the RCA universal remote. Look in the TV section of Best Buy or the Electronics section of Wal-Mart and Target. For an online retailer there is Amazon or New Egg, both carry models of RCA Universal Remotes.

Try purchasing the manual.

Toshiba 112 313 413 419 506 510 512 517 613 902

That could vary greatly depending on what model of Toshiba TV you have. The link below is to Toshiba's web site where you can get product support as well as replacement owner's manuals, etc.

Code 1023 worked for an Insignia 22", 32" and 55".

Code 1023 also works for the Insignia 42" LCD 1080p, 120 Hz

(FYI - This code is not listed in the guide that A,T & T includes with its remotes)

Code 1033 has also been suggested.

You are absolutely buggered mate. No one at either ebuyer (who sell Vistrons) or Vistron themselves can be arsed to sort out this very common problem.

If i ever do I will sell the solution for £5 as there are so many people who want the answer.