0
Remote Control Devices
A remote control device is commonly an infrared device used to control electronic devices such as televisions and DVD players. It is usually powered by AA or AAA size batteries.
2,009 Questions
Where can i find Codes for a GE universal remote?
GE remote controls are distributed by Jasco. The remote control manuals can be found and downloaded from their site at the link below.
What is universal remote code for HP BD-2000?
wish I knew I contacted hp and Shaw support Ill let you know if I find anything out. There is no code.
What if you do not know the model number of your RCA universal remote?
Well you cannot get arrested for not knowing it nor is the lack harmful.
Such codes are generated by the universal remote manufacturer rather than the TV manufacturer. As such, the actual codes will differ from one remote to another. Regretfully, Olevia TV's (for the most part) use proprietary infrared frequencies. This means that the code for another TV brand will not work with Olevia TV's. If you are looking for a universal remote, Olevia made a learning remote (model RC-LRN). Amergence Technology Inc. sells them for 39.99. They can be reached at 866-965-3842.
I don't show a code yet for that brand of TV, however, you can perform a power scan to see if you can find a code on the remote that will work. I have provided the power scan instructions.
Remote: Basic Remote (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Press and release the red TV Power button.
- Press and release the Up or Down Arrow button once every second on the remote until the television turns off.
- After the television turns off, press and release the OK button.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Just did some research and found that SEIKI is made in LG so I used a LG code on my dish and it worked the code that worked for me was 718 hopes this helps others
What is the remote code for an sansonic converter box with an comcast remote?
The correct code is tv mode actually toshiba 5102 although does not give any options other than volume & channel up and down and off on I have yet to configure how to retain auto scan options
What is the remote control code for samsung tv un46fh6030f?
I have provided the codes and instructions on programming your DISH remote to your Samsung TV.
Remote codes: 738, 680, 516, 833, 369, 526, or 573.
- Remotes: Basic (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Enter the three-digit code using the buttons on the number pad.
- Press #. Note: The LED will flash three times.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
What are the GE universal remote codes for a Sylvania TV?
You can consult your instruction manual (the list is usually a separate document) or contact Jasco Products Company support at 1-800-643-8483 Monday - Friday, 7:30am - 5:00pm (CST). Jasco Products Company is licensed to handle GE products and accessories.
How do I am program an RCA model RCRN04GR universal remote control?
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
Codes of a sentry universal remote for a symphonic television?
I have a sanyo tv too and just bought the same remote. the codes listed are 004, 048, 049, 080, 107, 162, 169, and 180, but the one that worked for mine is the second one. hope this helps.
Hi!! I"M FROM CR THANK YOU FOR THE INFORMATION.
How do you program a radio shack 15-2147 remote control?
here is how http://www.rcinfo.com/152142.htm
What is the TV code for dynex tv?
Another code you can use for your Dynex TV is 727. I have provided instructions on how to program your remote to your TV.
Remotes: Basic (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Enter the three-digit code using the buttons on the number pad.
- Press #. Note: The LED will flash three times.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
720 just worked for me, 42" LCD
096 worked for my Dynex and the other website said that it generally works with most store brand tvs.
What are the Sharp TV remote codes for a Motorola universal remote?
Hi Dear,
These are the codes fore sharp TV 011,,034,049,058,181,20,216,226
Tivo remote codes for a 32 coby tv?
If you are a DirecTV or Cox subscriber, you may sync a universal remote to your television using code 1548 or 11548.
These codes are for use with the following Coby television models:
TFTV1022, TFTV1212, TFTV1513, TFTV1514, TFTV1524, TFTV1913, TFTV1923, TFTV2214, TFTV2224, TFTV2617, TFTV3217, TFTV3717, TFTV4717
If the codes do not work, or if you are not a DirecTV or Cox customer, the universal remote control manufacturer is responsible for creating and embedding a Coby-compatible code in the remote control. Please contact your cable carrier or the universal remote control manufacturer for assistance.
These codes may work for you:
REMOTE CODES:
Brand: Coby
Most likely code: 11538
Others to try:
12017, 11531, 12003, 11314
My set (coby tftv1524) worked with code 11531-try them all & good luck!
What is the universal remote code for a sunkey converter box?
Programming procedure for GE Universal Remote to Digital Stream converter box is as follows:
1. Turn on converter box either manually or otherwise.
2. Press SETUP button until light comes/stays on.
3. Press and release CBL/SAT button.
4. Press 1751 in that order on your keypad.
5. Press ON/OFF button.
6. Press ENTER button.
Note: This particular code was originally designed for GE Universal Remote 24938 but will work with the 24912 model also except the MENU selection. I could not get that feature to work, however, it may be that it will work while you are still in SETUP mode...I did not try that because, fortunately, all my settings were already programmed the way I wanted them.
How do I sync a TV universal remote to the TV?
The best way to use sync to a universal remote would be simple. The only thing you have to do it point the remote to the control on the TV. There should be a button on the DVD player remote that will allow you to make sync these two together.
What is the remote code for a Magnavox on a RCA remote?
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
Yamaha remote codes for vizio tv?
627
A few additional codes just in case 627 doesn't work will be, 507, 507, & 000.
What are the codes for a vizio universal remote model?
003, 012, 035, 036, 041, 073, 074, 086, 094, 097, 100, 103, 111, 115, 215, 239, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256, 257, 258, 259, 260, 261, 262, 263, 264 try these
How do you program a 12 dip switch remote to a 10 dip switch remote?
You can not use a 10 switch for an 8 switch. I just had to call a lock shop for the info.
How do you program Toshiba ct 90302 remote?
First, you must find the three digit code for your device. You can find this code at Toshiba's website under the page "Remote Control Codes". Once you have the code, go to the "Mode Select" button on your remote control and select the device you wish to control. Finally, aim your remote control at the device, hold down the "Recall" button, and enter the three digit code.
