How do you replace the tail light bulb on a Saturn ion?
From: http://www.saturnfans.com/forums/showthread.php?t=87165
How to replace tail lights on S-series ---- This how-to covers replacement of brake lights, rear turn signals, and reverse lights on the S-series. I did this on a 3rd gen SL2, but the instructions are probably applicable to most models and years.
You will need the following:
* A T-15 Torx screwdriver
This is a quick operation. I was able to do it in five minutes in a parking lot.
First, find out which light(s) are burned out. The easiest way is to have a helper hit the brakes/turn signal/reverse while you stand behind the car. If you can't find a helper, you can just park so your car's rear-end faces the side of a shiny car, and you should be able to see which lights are coming on in the rear view mirror.
Next, go to the auto parts store and get the proper bulbs. I used Sylvania Long Life bulbs. Don't bother with OEM bulbs, they're needlessly expensive. You can also pick up special grease to coat the bulb socket if you like (it's sold in a little packet at the counter of most auto parts stores).
Pop your trunk, and you'll see two Torx screws on the side of the tail light assembly. Use your T-15 screwdriver on these.
The tail light assembly should easily slide out at this point. You'll see four connectors: a wiring harness, reverse light, turn signal, and brake light. Disconnect the proper connector, and you'll see the burned-out bulb. Give it a yank, and it will pop right out.
Coat the new bulb's base with dielectric grease (optional), and insert the new bulb. It will go in with a satisfying snap.
Slide the tail light assembly into the body of the car, and screw the two Torx screws back in.
You probably got a 2-pack of bulbs, so go ahead and replace the same bulb on the other side of the car! It will most likely burn out soon anyway.
dmc
Member
Join Date: May 2006Posts: 142
dmc's Photos
2000 SL2
What is a description of an ion?
An ion is an element or compound with an overall charge on it. This means that it has extra electrons or are lacking in the amount of electrons it needs in order to achieve the perfect octet (or full valence shell).
For example: Cl- is chlorine but with one extra electron.
R2C=(NR2)+ Note: Nitrogen has a positive charge. It can be generated by treating an aldehyde or ketone with a primary or secondary amine.
This is an on-going problem with Saturn ignitions.....The switch apprently has some internal grease that prevents the switch from making contact and starting the car (especially when it is cold).....You can replace the switch, but I have a better idea.....Spend the money you would have spent on a new switch by installing a remote starter.....should cost you about $300.00 installed.
Where can you find a diagram for a 2003 Saturn ion hood latch?
What do you need the diagram for? Did you take the latch apart If so there is no diagram
What type of engine battery do you buy for a 2003 Saturn Ion?
You need to go to a auto parts store and they will tell you the proper size battery you need for your car. I prefer Advance auto and they will change the battery for you if you can drive the car up there.
Photos of the electric power steering. located on a 2004 Saturn Ion?
There is no fluid on the 2004. They operate on electric power steering. you need to replace the two fuses on top of the battery that control your power steering. your owners manual will show you which ones are the right ones.
Where is the drain plug on the oil pan of a 2004 Saturn Ion?
Near the bottom of the oil pan underneath the car. You may want to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.