What is the difference between amplitude and vibration?
Amplitude- The maximum distance to which an oscillating or vibrating object moves from its central position is called amplitude.
Vibration- Sound is produced by rapid -to and -fro movements ,called vibrations.
What is the difference between Watts and Kilowatt hours?
Watts is smaller than kilowatts.
watts is unit of power and kilowatts hour is unit of energy. Electrical devices are specified in watts where as electrical bill is for kilowatt hr use.
Does electrolysis occur between aluminum and galvanised iron?
Yes, electrolysis can occur between aluminum and galvanized iron when they come into direct contact with each other in the presence of an electrolyte (such as water or saltwater). This can lead to galvanic corrosion, where the more noble aluminum acts as the cathode and the less noble galvanized iron acts as the anode, causing the iron to corrode. To prevent this, it is important to use appropriate insulation or barriers between the two metals to avoid direct contact.
What is the difference between response and adaptation?
Respond is when u c the chik ur bout to bone has a dick and u say "Oh my god WTF."
and adapt is when u see the chick has a dick and u adapt to the situation and say "Guess we're goin anal."
What are the differences between nucleoside n nucleotide?
A nucleoside is composed of a nitrogenous base and a sugar molecule, while a nucleotide is a nucleoside with one or more phosphate groups attached. Nucleotides are the building blocks of nucleic acids like DNA and RNA, while nucleosides are not involved in DNA or RNA synthesis.
What is the difference between a cheer CLAP and a cheer CLASP?
A clap is when you clap your hands like a blade. Your fingers are straight up and down and you do not wrap your fingers together. A clasp is when you clap with your hands and you wrap one hand over the other. Cheerleaders usually clasp right before a jump or a stunt.
What is the difference between a cf4 and a cf5?
CF4 and CF5 are different chemical compounds. CF4, also known as carbon tetrafluoride, is a tetrahedral molecule composed of one carbon atom and four fluorine atoms. CF5 is not a commonly known compound, but theoretically it would be a pentagonal bipyramidal molecule composed of one carbon atom and five fluorine atoms.
What is the time difference between Texas and Balad Air Base Iraq?
The time difference between Iraq and Texas is about 8 hrs. with Iraq ahead of Texas.
The difference between artificial neural network and human neural network?
Difference # 1: Brains are analogue; computers are digital
It's easy to think that neurons are essentially binary, given that they fire an action potential if they reach a certain threshold, and otherwise do not fire. This superficial similarity to digital "1′s and 0′s" belies a wide variety of continuous and non-linear processes that directly influence neuronal processing.
For example, one of the primary mechanisms of information transmission appears to be the rateat which neurons fire - an essentially continuous variable. Similarly, networks of neurons can fire in relative synchrony or in relative disarray; this coherence affects the strength of the signals received by downstream neurons. Finally, inside each and every neuron is a leaky integrator circuit, composed of a variety of ion channels and continuously fluctuating membrane potentials.
Failure to recognize these important subtleties may have contributed to Minksy & Papert's infamous mischaracterization of perceptrons, a neural network without an intermediate layer between input and output. In linear networks, any function computed by a 3-layer network can also be computed by a suitably rearranged 2-layer network. In other words, combinations of multiple linear functions can be modeled precisely by just a single linear function. Since their simple 2-layer networks could not solve many important problems, Minksy & Papert reasoned that that larger networks also could not. In contrast, the computations performed by more realistic (i.e., nonlinear) networks are highly dependent on the number of layers - thus, "perceptrons" grossly underestimate the computational power of neural networks.
Difference # 2: The brain uses content-addressable memory
In computers, information in memory is accessed by polling its precise memory address. This is known as byte-addressable memory. In contrast, the brain uses content-addressable memory, such that information can be accessed in memory through "spreading activation" from closely related concepts. For example, thinking of the word "fox" may automatically spread activation to memories related to other clever animals, fox-hunting horseback riders, or attractive members of the opposite sex.
The end result is that your brain has a kind of "built-in Google," in which just a few cues (key words) are enough to cause a full memory to be retrieved. Of course, similar things can be done in computers, mostly by building massive indices of stored data, which then also need to be stored and searched through for the relevant information (incidentally, this is pretty much what Google does, with a few twists).
Although this may seem like a rather minor difference between computers and brains, it has profound effects on neural computation. For example, a lasting debate in cognitive psychology concerned whether information is lost from memory because of simply decay or because of interference from other information. In retrospect, this debate is partially based on the false asssumption that these two possibilities are dissociable, as they can be in computers. Many are now realizing that this debate represents a false dichotomy.
Difference # 3: The brain is a massively parallel machine; computers are modular and serial
An unfortunate legacy of the brain-computer metaphor is the tendency for cognitive psychologists to seek out modularity in the brain. For example, the idea that computers require memory has lead some to seek for the "memory area," when in fact these distinctions are far more messy. One consequence of this over-simplification is that we are only now learning that "memory" regions (such as the hippocampus) are also important for imagination, therepresentation of novel goals, spatial navigation, and other diverse functions.
Similarly, one could imagine there being a "language module" in the brain, as there might be in computers with natural language processing programs. Cognitive psychologists even claimed to have found this module, based on patients with damage to a region of the brain known as Broca's area. More recent evidence has shown that language too is computed by widely distributed and domain-general neural circuits, and Broca's area may also be involved in other computations (see here for more on this).
Difference # 4: Processing speed is not fixed in the brain; there is no system clock
The speed of neural information processing is subject to a variety of constraints, including the time for electrochemical signals to traverse axons and dendrites, axonal myelination, the diffusion time of neurotransmitters across the synaptic cleft, differences in synaptic efficacy, the coherence of neural firing, the current availability of neurotransmitters, and the prior history of neuronal firing. Although there are individual differences in something psychometricians call "processing speed," this does not reflect a monolithic or unitary construct, and certainly nothing as concrete as the speed of a microprocessor. Instead, psychometric "processing speed" probably indexes a heterogenous combination of all the speed constraints mentioned above.
Similarly, there does not appear to be any central clock in the brain, and there is debate as to how clock-like the brain's time-keeping devices actually are. To use just one example, the cerebellum is often thought to calculate information involving precise timing, as required for delicate motor movements; however, recent evidence suggests that time-keeping in the brain bears more similarity to ripples on a pond than to a standard digital clock.
Difference # 5 - Short-term memory is not like RAM
Although the apparent similarities between RAM and short-term or "working" memory emboldened many early cognitive psychologists, a closer examination reveals strikingly important differences. Although RAM and short-term memory both seem to require power (sustained neuronal firing in the case of short-term memory, and electricity in the case of RAM), short-term memory seems to hold only "pointers" to long term memory whereas RAM holds data that is isomorphic to that being held on the hard disk. (See here for more about "attentional pointers" in short term memory).
Unlike RAM, the capacity limit of short-term memory is not fixed; the capacity of short-term memory seems to fluctuate with differences in "processing speed" (see Difference #4) as well as with expertise and familiarity.
Difference # 6: No hardware/software distinction can be made with respect to the brain or mind
For years it was tempting to imagine that the brain was the hardware on which a "mind program" or "mind software" is executing. This gave rise to a variety of abstract program-like models of cognition, in which the details of how the brain actually executed those programs was considered irrelevant, in the same way that a Java program can accomplish the same function as a C++ program.
Unfortunately, this appealing hardware/software distinction obscures an important fact: the mind emerges directly from the brain, and changes in the mind are always accompanied by changes in the brain. Any abstract information processing account of cognition will always need to specify how neuronal architecture can implement those processes - otherwise, cognitive modeling is grossly underconstrained. Some blame this misunderstanding for the infamous failure of "symbolic AI."
Difference # 7: Synapses are far more complex than electrical logic gates
Another pernicious feature of the brain-computer metaphor is that it seems to suggest that brains might also operate on the basis of electrical signals (action potentials) traveling along individual logical gates. Unfortunately, this is only half true. The signals which are propagated along axons are actually electrochemical in nature, meaning that they travel much more slowly than electrical signals in a computer, and that they can be modulated in myriad ways. For example, signal transmission is dependent not only on the putative "logical gates" of synaptic architecture but also by the presence of a variety of chemicals in the synaptic cleft, the relative distance between synapse and dendrites, and many other factors. This adds to the complexity of the processing taking place at each synapse - and it is therefore profoundly wrong to think that neurons function merely as transistors.
Difference #8: Unlike computers, processing and memory are performed by the same components in the brain
Computers process information from memory using CPUs, and then write the results of that processing back to memory. No such distinction exists in the brain. As neurons process information they are also modifying their synapses - which are themselves the substrate of memory. As a result, retrieval from memory always slightly alters those memories (usually making them stronger, but sometimes making them less accurate - see here for more on this).
Difference # 9: The brain is a self-organizing system
This point follows naturally from the previous point - experience profoundly and directly shapes the nature of neural information processing in a way that simply does not happen in traditional microprocessors. For example, the brain is a self-repairing circuit - something known as "trauma-induced plasticity" kicks in after injury. This can lead to a variety of interesting changes, including some that seem to unlock unused potential in the brain (known as acquired savantism), and others that can result in profound cognitive dysfunction (as is unfortunately far more typical in traumatic brain injury and developmental disorders).
One consequence of failing to recognize this difference has been in the field of neuropsychology, where the cognitive performance of brain-damaged patients is examined to determine the computational function of the damaged region. Unfortunately, because of the poorly-understood nature of trauma-induced plasticity, the logic cannot be so straightforward. Similar problems underlie work on developmental disorders and the emerging field of "cognitive genetics", in which the consequences of neural self-organization are frequently neglected .
Difference # 10: Brains have bodies
This is not as trivial as it might seem: it turns out that the brain takes surprising advantage of the fact that it has a body at its disposal. For example, despite your intuitive feeling that you could close your eyes and know the locations of objects around you, a series of experiments in the field of change blindness has shown that our visual memories are actually quite sparse. In this case, the brain is "offloading" its memory requirements to the environment in which it exists: why bother remembering the location of objects when a quick glance will suffice? A surprising set ofexperiments by Jeremy Wolfe has shown that even after being asked hundreds of times which simple geometrical shapes are displayed on a computer screen, human subjects continue to answer those questions by gaze rather than rote memory. A wide variety of evidence from other domains suggests that we are only beginning to understand the importance of embodiment in information processing.
Bonus Difference: The brain is much, much bigger than any [current] computer
Accurate biological models of the brain would have to include some 225,000,000,000,000,000 (225 million billion) interactions between cell types, neurotransmitters, neuromodulators, axonal branches and dendritic spines, and that doesn't include the influences of dendritic geometry, or the approximately 1 trillion glial cells which may or may not be important for neural information processing. Because the brain is nonlinear, and because it is so much larger than all current computers, it seems likely that it functions in a completely different fashion. (See here for more on this.) The brain-computer metaphor obscures this important, though perhaps obvious, difference in raw computational power.
How do you get the MW2 red dot sight in MW3?
The red dot sight from Call of Duty: Modern Warfare 2 was only available during the builds of MW3 and was never actually released for the game. For unknown reasons the red dot sight from MW2 was cut and they used a similar model from the original Modern Warfare but with changes. But an AK-47 with the MW2 red dot sight can be found in MW3 in the spec ops mission "Kill Switch".
What is difference between Cereals and Millets?
cereals are large grained , grown as a main crop , grown in good soil and require good amount of rainfall , they are economically important
whereas
millets are small grained , grown as a mixed crop , grown in poor soil and require low rainfall , they are economically less important
What is difference between grams and milligrams?
Milligrams are much smaller; there are 1000 milligrams in 1 gram.
What is the difference between deodorent and anti persperint?
Deodarant usually has a frangrant smell that covers the smell that the bacteria leaves after it breaks down from your prespiration(sweat). Antiperspirants can do the same thing, but they can also keep you from sweating. Antiperspirants usually goes under the arm and are considered drugs by the FDA. Deodarants are considered cosmetic products and can be placed anywhere on the body (in the form of sprays and powders as well)
What is the difference between a Vapour and a Mist?
1. Vapour is formed when a liquid is boiled- like steam would be the vapour form of water. 2. If you take a small quantity of water and spray it thru a fine nozzle under high pressure, the resultant spray, which would be made of very fine droplets of water would be called a mist.
What is the difference between spt-1 and spt-2 wire?
spt-1, spt-2 & spt-3 wire difference: #3 has the thickest exterior ..................................
The longer answer: spt-1, spt-2 & spt-3 = Stranded, Parallel, Thermoplastic (lamp cord) = "zip wire." It is the commonly-seen, flat, 2-conductor electrical cord found in most homes, with #18 gauge stranded copper wire inside. They connect table lamps, fans, clocks, extension cords, & Christmas lights. The difference between SPT-1, SPT-2 and SPT-3 rests with their protective exterior, each having heavier construction than the previous number. All are rated for a 7 amp load. Electricians like "zip cord" because the parallel wires can easily be snipped and pulled apart (unzipped) to quickly wire a plug or lamp.
---spt-3: is the newest cord , it has the thickest thermoplastic insulator, and has been the required size for most consumer electric items since the 1980's.
---spt-1: has the thinnest exterior and was introduced around the 1950's as the modern replacement for the twisted-pair cloth+rubber cords of the 1920's. Although spt-1 is still sold on spools, it has been gradually phased out for most consumer lighting because UL lab tests showed it prone to wear when people abused it (running under carpets, extreme abrasion, etc.). SPT-1 can still be found on many light-duty Christmas sets. .......... written by dave from austin, texas
What is the difference between brass and iron?
Brass is an alloy of copper and zinc, known for its golden color and resistance to corrosion. Iron is a pure metal with a silvery-gray color that is prone to rusting when exposed to moisture. Iron is much stronger and more durable than brass, but brass is more resistant to corrosion.
What is the difference between a strap line and a sub heading?
The main difference between a subheading and a strap line is the media. Are you reading a newspaper or a magazine? Then the sub point is a strap line. When the article is published as a chapter in a book then the strap line changes into a subheading. Location also has to do with the place on the earth. The above is true for some countries but not for others. The United States and England are divided by a common language.
What is the difference between a material and a raw material?
A material is a substance used to make things, such as wood or metal. A raw material is a natural resource that has not been processed or transformed into a final product, such as crude oil or cotton. Raw materials are often the starting point for manufacturing materials.
What are the difference between td and tc pipets?
The labels TC and TD mean "to contain" and "to dispense" respectively. What this means is that glassware can either be calibrated for the purpose of containing a solution or for the purpose of transferring and dispensing a solution. Most flasks will be labeled TC while most pipets and burets will be labeled TD.
What is the difference between treating and curing?
Treating is just a part of curing.
Treating deals with the symptoms, to alleviate pain or suffering, without necessarily effecting a cure.
A cure is when the ailment can be completely removed and everything returns to normal.
Can you show me a diagram of the difference between element compound and mixtures?
I'm unable to show diagrams, but I can describe the differences. Elements are pure substances made up of only one type of atom. Compounds are substances made up of two or more different types of atoms chemically bonded together. Mixtures are combinations of two or more substances physically mixed together, but not chemically bonded.
What is the difference between ARB and GAR in Coal Analysis?
ARB (as received basis) refers to the analysis of coal as it is received at the power plant, including the moisture content. GAR (gross as received basis) refers to the analysis of coal without adjusting for moisture content. So, GAR will have a higher value compared to ARB because it does not account for the moisture content that is present in the coal.
What is the difference between flue gas and stack gas?
Flue gas is the gas that is emitted from a combustion process within a building or industrial facility, while stack gas refers to the mixture of gases emitted from a chimney or stack. In general, flue gas is the specific type of gas that is produced from a specific process, while stack gas is the broader term that encompasses all gases emitted from a stack or chimney.
What is the difference between N-nitrogen and N2-nitrogen gas?
Nitrogen (and oxygen and hydrogen) in the form of a gas is usually found as a molecule of two atoms of Nitrogen. That is N2. The fairly weak bond can be broken chemically, by heat, etc, and then you would have N.
What is the difference between injection and syringe?
An injection is a method of delivering medication or fluids into the body, while a syringe is a tool used to administer injections by drawing or dispensing fluids. Injections can be given using various methods, such as with a syringe or through an IV drip.