answersLogoWhite

0

🧪

Time

This category is for questions about the methods humans go about measuring the passage of time. You can also find questions about converting one unit of time to another.

9,512 Questions

How does the diameter of each ripple change as time passes?

(T(k) = (1  f)hsls / 2Q = (1  f) 0.16(2p / k) 2 / 2Q)

Acceleration is the slope of the velocity vs time graphing?

Acceleration is actually the rate of change of velocity over time. It is the derivative of the velocity function with respect to time. If the velocity vs time graph is a straight line, the acceleration is constant.

When A speed-time graph shows a car moving at 10 ms for 10 s. The car speed constantly decreases until it comes to a stop at 30 s. Which describes the slope of the graph from 10 s to 30 s?

The slope of the graph from 10 s to 30 s is negative because the car's speed is decreasing over time. This negative slope indicates that the car is slowing down during that time interval.

Which process wil speed up the time it takes for the salt to dissolve?

Increasing the temperature of the water will speed up the dissolution of salt as it increases the kinetic energy of the salt particles, allowing them to move and dissolve faster. Stirring or agitating the water will also help by continuously bringing fresh water into contact with the salt crystals, aiding in the dissolution process.

How has the human body has adapted to the force of gravity on Earth over time?

The human body has adapted to the force of gravity on Earth through the development of a strong skeletal system to support upright posture, a muscular system that allows for movement and stability, and cardiovascular adjustments to maintain circulation when standing. These adaptations help humans navigate and function effectively in a gravitational environment.

What is the average driver's reaction time in a clinical laboratory is second?

The average driver's reaction time in a clinical laboratory setting is typically around 0.25 to 0.5 seconds. This can vary based on factors like age, experience, and alertness level.

If Manuel exerts a force of 10 N to push a desk to the right at the same time Lynn exerts a force of 15 N to push the desk to the left the desk will move to the right.?

No, if the force exerted in one direction is greater than the force exerted in the opposite direction, the desk will move in the direction with the greater force, in this case to the left. The desk will move in the direction of the net force acting on it, which is the difference between the two forces (15 N to the left - 10 N to the right = 5 N to the left).

Is 12 am before 12 pm?

There is no such thing as 12 AM or 12 PM.

Those are commonly used improper terms.

The abbreviations AM and PM stand for Ante Meridiem and Post Meridiem, respectively. The terms ante and post mean before and after. The term meridiem refers to when the sun is at the middle of its arc across the sky.

Nominally the sun is at its meridiem at noon. Since it is *at* its meridiem this is neither before nor after the meridiem. It *is* the meridiem.

Likewise, midnight is neither 12 AM nor 12 PM. It is equally far from both. It is simply 12 midnight.

The military clock is better than the civilian clock for many reasons. One is that eliminates the complexity of specifically accounting for whether a time is before of after midnight. On the military clock noon is read as 1200 hours, and midnight is read as 2400 hours.

How do the oxygen and carbon dioxide levels change over time?

Oxygen levels tend to remain relatively stable over time due to the balance between oxygen production from photosynthesis and oxygen consumption by organisms. Carbon dioxide levels, on the other hand, can fluctuate due to human activities such as burning fossil fuels and deforestation, leading to an overall increase in atmospheric CO2 concentrations over time.

Why chemicals that have been used for a long time still need to be evaluated for safety?

Chemicals that have been in use for a long time may have new research that uncovers potential health or environmental risks not previously known. Evaluation for safety ensures that any potential risks associated with long-term exposure are identified and managed to protect human health and the environment. Ongoing evaluation is important to keep regulatory standards up to date and ensure that the public is adequately protected.

Why does small doses of ionizing radiation over a long period of time cause less damage?

Small doses of ionizing radiation over a long period of time allow the body's cells to repair damage more effectively and adapt to the exposure. This process can activate protective mechanisms within cells that help to reduce the overall impact of radiation-induced damage.

If the velocity is constant describe the slope of the graph on a position vs. time graph.?

If velocity is constant, the slope of the graph on a position vs. time graph will be a straight line. The slope of this line will represent the constant velocity of the object.

If the period of simple pendulum is halved its time period will become. What?

If the period of a simple pendulum is halved, its time period will become half of the original period. This means that it will complete one full swing in half the time it originally took.

If the mass of bob of a simple pendulum is doubled its time period is what?

The time period of a simple pendulum is not affected by the mass of the bob, as long as the amplitude of the swing remains small. So, doubling the mass of the bob will not change the time period of the pendulum.

What is the concept that explains how things change over time called?

The concept that explains how things change over time is called evolution. Evolution is the process by which different species develop and diversify from earlier forms through genetic changes and adaptations to their environment.

Why does aluminum take a long time to disolve?

Aluminum forms a protective oxide layer when exposed to air or water, which can slow down the dissolution process. This oxide layer acts as a barrier, preventing further reaction of the aluminum with the surrounding environment. Additionally, the dissolution rate of aluminum can depend on factors such as the pH of the solution and the presence of other ions that may compete for reaction with the aluminum surface.

When is the only time that light waves travel at the speed of light(186272 miles per second)?

Light waves always travel at the speed of light in a vacuum, regardless of the observer's frame of reference.

Which term for the time it takes each wave crest to pass certain point is called the what?

The term for the time it takes each wave crest to pass a certain point is called the "period" of the wave. This is the time interval between two consecutive wave crests passing a fixed point.

Why is it impossible to breathe ans swallow at the same time?

The epiglottis, a flap of tissue in the throat, closes to protect the airways when swallowing, preventing food or liquid from entering the lungs. This closure temporarily blocks the air passage, making it impossible to breathe and swallow simultaneously.

Why The term for the time it takes each wave crest to pass a certain point?

The term for the time it takes each wave crest to pass a certain point is called the "period" of the wave. It is typically measured in seconds and is the inverse of the frequency of the wave.

Why did the atomic theory change with time?

The atomic theory changed with time as new experimental evidence and advancements in scientific knowledge challenged and refined our understanding of the structure of atoms. As technology improved, scientists were able to conduct more precise experiments that led to the discovery of subatomic particles like electrons, protons, and neutrons, which required the atomic theory to be updated to incorporate these new findings.

Why are processes prohibited from setting the interrupting time?

Processes are usually prohibited from setting the interrupting time in order to prevent them from interfering with system functions and potentially causing instability or crashes. Interrupt handling needs to be managed by the operating system to ensure that critical tasks are executed in a timely and orderly manner. By restricting processes from setting interrupt times, the system can maintain control over the interrupt handling process and maintain system integrity.