0
Volume
Questions about the various units and conversions of volume. This category is also home to questions which ask the volume of certain objects given length, width, and height.
26,790 Questions
How many gallons are there in 21 quarts?
There are 4 quarts in one gallon. Therefore, 21 quarts is equal to 21/4 = 5.25 gallons.
How many fluid ounces are in a 100ml?
100 millilitres = 3.51950652 Imperial fluid ounces
100ml also equals 3.37140227 US fluid ounces.
While there may be ounces of liquid and ounces of weight, the same is not true of tons. A ton is a measure of weight.
When one speaks of a "liquid ton", it merely means the volume of liquid that weighs 1 ton, and that would be a different volume for each liquid, since they have various densities.
1 gallon makes 128 ounces and 1 ounce is 0.0078 gallon in U.S measure. There are 8 ounces in a cup, 2 cups in a pint, 2 pints in a quart and 4 quarts in a gallon. That makes 128 ounces in a gallon US. In UK 20 ounces to the pint, 8 pints to the gallon which makes 160 ounces Imrerial measure.
How much does one cubic foot of silver weigh?
Depending on its density, about 0.708lbs per cubic inch. Much heavier than lead.
What is a 3d trapezium called?
A three-dimensional trapezium is called a trapezoid. It is a four-sided figure with at least one pair of parallel sides.
An air bubble in the solution would effectively increase the volume that you measure for the solid because you would coutn the volume of the bubble as the volume of the solid (but of course, it's just air!).
So if you measure the density of a solid by putting a weighed amount of the solid in a liquid (in which the solid is insoluble), then an air bubble in the solution would make the measured volume of the solid larger than it really is.
Density is found by taking the mass divided by volume. Assuming you find the mass correctly, if the measured volume is larger than the real volume, the denominator in the fraction (mass/volume) will be too big. If a denominator is too big, than the fraction is smaller.
Therefore an air bubble will cause you tounder estimate the density.
The cubic meter, symbol: m³, is the SI derived unit of volume. It is the volume of a cube with edges one meter in length. 1 cubic metre is equivalent to:
1,000 litres = exactly
~35.3 cubic feet (approximately)
1 cu ft = 0.028316846 m³ = exactly
~1.31 cubic yards (approximately)
1 cu yd = 0.764554857 m³ = exactly
~6.29 oil barrels (approximately)
1 oil bbl = 0.158987294 m³ = exactly
A cubic meter of pure water at the temperature of maximum density (3.98 °C) and standard atmospheric pressure (101.325 kPa) has a mass of 1000 kg, or one tonne.
1000 feet of 2 inch water line equals how many gallons?
There are 22.85 gallons in a waste line which is 2 inches in diameter and is 140 feet long. This can be calculated as pi * r *r *length *7.48051 where r and length are both expressed in feet. (pi = 3.14159265).
What can you do with 20000 gallons of water?
With 20,000 gallons of water, you could fill a swimming pool, water a large garden or agricultural crop, provide drinking water for a small community for a short period of time, or support industrial processes that require a large amount of water.
How many cubic feet is the average person?
The average person weighs 137 pounds... given that is an average of children and adults of all shapes and sizes. If you go with the average adult human, you're looking at closer to 150. Humans are about as dense as water, which weighs about 62 pounds per cubic foot. So a human wieghing in at 150 lbs, should be somewhere around 2.4 to 2.5 cubic feet in volume.
How do you Convert ppm to pounds per gallon?
This question is poorly phrased. ppm or parts per million is a measure of the concentration of one element of a solution or gas. Pounds per volume is a measure of density and depends on the materials. The two measure different things and therefore there's no general conversion.
Many are the engineers that are trying to convert ppm in wastewater to actual pounds for reporting purposes. And pounds has more meaning to the average individual than ppm does. Generally speaking, one may take:
(ppm) x (flow of water (gal/"time")) x (conversion factor) = pounds per "time"
In this example, time = 1 month. Therefore, the ppm of a pollutant in water may be converted to pounds by following the following equation: (note: ppm = mg/l)
(mg/l)(gal/mo)(3.7854Lit/gal)(1Lb/453.59g)(1g/1000mg)=Lb/mo
The conversion factor = 8.3454E-06 or 0.0000083454
Above can be simplified as follows:
Monthly Gallons of Chemical x Density of Same Chemical in "Pounds/Gallon" x (# of Parts/1,000,000) (Unitless) = ...Pounds per month
If Unknown, Density = Specific Gravity x 8.345, i.e., Water Weight in Pounds per Gallon
Above both methods assume that PPMV value is in relation to the total volume of solvent or chemical used and not necessarily the total volume of inlet or outlet air of a process equipment. For PPMv of the outlet or inlet air, the calculations will be different as provided in EPA's AP-42 Conversion Table along with the use of air fuel ratio in case of combustion process.
Good luck!
A liter is a unit of volume, equal to a cubic decimeter; 1/1000 of a cubic meter; or 1000 cubic centimeters. For comparison, a typical cup has a volume of 0.2 - 0.25 liters, depending on the size of the cup of course.
If there are 239 million cubic feet of water how many barrels is that?
In the U.S., most fluid barrels (apart from oil) are 31.5 US gallons. Therefore, 239 million cubic feet of water would equate to about 56.75 million barrels of water.
100 gallon equals how many pounds?
The weight of 100 gallons depends on what is being measured. For water, 100 gallons is equal to approximately 834 pounds. However, for other substances, the weight will vary based on the density of the material.
100 grams is equal to approximately 3.53 ounces. This is due to the fact that 1 ounce is equal to approximately 28.35 grams.
How many cubic feet in a cylinder that is 8 feet wide and 2 feet tall?
The question is impossible to answer because there is data missing. Assuming 8 ft is the length and 6 ft is the width, the measurement for the height is missing. In any event, to figure out cubic feet, the formula is length (in feet) * width (in feet) * height (in feet). Hope this helps.
How many cubic inches are in 12 inches of 2 inch pipe?
To find the volume of a pipe, you can use the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height of the cylinder. For a 2-inch diameter pipe, the radius is 1 inch. Thus, the volume of 12 inches of 2-inch pipe would be π * 1^2 * 12 = 12π cubic inches.
