The difference between new construction and replacement windows?
Replacement Windows are designed to fit inside the existing window frame once the original window sashes are removed; there is no need to remove the interior casing and exterior casing. This makes for a very neat and faster installation.
New Construction windows require the entire window frame to be removed along with all interior casing and all exterior casing as well. Therefore the opening can be enlarged to create more replacement options. All the interior and exterior casing (trim) will be replaced.
How do you shutdown client PC from server in Linux using shutdown command?
wala man kmeng sibe ano kapa boba
What is meaning of executive in windows NT architecture?
In Windows NT, executive refers to the operating system code that runs in kernel mode.
Can a new IP addressing scheme increase the number of available IP addresses?
Yes and that is called IPV6
Security groups in windows server?
Security groups
Used with care, security groups provide an efficient way to assign access to resources on your network. Using security groups, you can:
Assign user rights to security groups in Active Directory
User rights are assigned to security groups to determine what members of that group can do within the scope of a domain (or forest). User rights are automatically assigned to some security groups at the time Active Directory is installed to help administrators define a person's administrative role in the domain. For example, a user who is added to the Backup Operators group in Active Directory has the ability to backup and restore files and directories located on each domain controller in the domain.
This is possible because by default, the user rights Back up files and directories and Restore files and directories are automatically assigned to the Backup Operators group. Therefore, members of this group inherit the user rights assigned to that group. For more information about user rights, see User rights. For more information about the user rights assigned to security groups, see Default groups.
You can assign user rights to security groups, using Group Policy, to help delegate specific tasks. You should always use discretion when assigning delegated tasks because an untrained user assigned too many rights on a security group can potentially cause significant harm to your network. For more information, see Delegating administration. For more information about assigning user rights to groups, see Assign user rights to a group in Active Directory.
Assign permissions to security groups on resources
Permissions should not be confused with user rights. Permissions are assigned to the security group on the shared resource. Permissions determine who can access the resource and the level of access, such as Full Control. Some permissions set on domain objects are automatically assigned to allow various levels of access to default security groups such as the Account Operators group or the Domain Admins group. For more information about permissions, see Access control in Active Directory.
Security groups are listed in DACLs that define permissions on resources and objects. When assigning permissions for resources (file shares, printers, and so on), administrators should assign those permissions to a security group rather than to individual users. The permissions are assigned once to the group, instead of several times to each individual user. Each account added to a group receives the rights assigned to that group in Active Directory and the permissions defined for that group at the resource.
Like distribution groups, security groups can also be used as an e-mail entity. Sending an e-mail message to the group sends the message to all the members of the group.
How can an IP address for a network device be assigned to a particular network?
Router(config)# hostname Admin
Admin(config)# enable secret cangetin
Admin(config)# interface fa0/1
Admin(config-if)#ip address 192.168.1.22 255.255.255.248
Router(config)# hostname Admin
Admin(config)# enable password cangetin
Admin(config)# interface fa0/1
Admin(config-if)# ip address 192.168.1.22 255.255.255.248
Router(config)# hostname Admin
Admin(config)# enable secret cangetin
Admin(config)# interface fa0/0
Admin(config-if)# ip address 192.168.1.22 255.255.255.248
Router(config)# hostname Admin
Admin(config)# enable password cangetin
Admin(config)# interface fa0/0
Admin(config-if)# ip address 192.168.1.22 255.255.255.248
What type of file does the Windows 2000 setup manager wizard create and what is this file used for?
stop trying to cheat on your labs.
Domain controllers located in different sites will participate in intrasite replication?
Only one domain controller will be used per site to replicate to another site(process called as intersite replication) it could be a bridge head server(selected DC to do replication from the site)or DC selected by ISTG protocol if enabled. there would be lot of DCs in intrasite replication within a site.
List the steps to load the Recovery Console when using the four Windows 2000 rescue disks?
Access the Recovery Console by first booting from the Windows 2000/XP CD, or the four Windows 2000 setup disks or install the console under the boot loader menu and access it from there.
Insert the 1st of the disks and restart the PC. You are directed to insert each of the four disks in turn, and then the Setup screen appears. Type R to select the "To repair a Windows 2000 installation" option, then type C to select the Recovery Console.
Why the interaction with hardware is limited to only one or two components of windows 2000xp?
Limiting access to hardware mainly to the HAL increases OS integrity because more control is possible.
How do you open a doc with a pub extension?
The ".pub" file extension is associated with the "Publisher" application included in recent versions of Microsoft Office. Once a *.pub file has been opened in publisher, it can be re-saved as a web page or other format using the "Save As" command and selecting the desired format under the "Save as type:" drop down menu.
How do you delete old computer accounts if you don't remember the password?
with your computer administrator you can take passwords off the accounts without knowing the password.
This is error display system , when you modem is not install or configure properly
What is required before Windows 2000 windows XP or windows vista will let you onto the desktop?
user name and password
What is an advantage of running windows 2000 on NTFS as opposed to FAT32?
FAT32 is limited to 4 GB files. Files on NTFS can be up to 2 terabytes in size. Another advantage WIndows 2000 would have with NTFS is the support of file permissions. File permissions can stop different accounts from modifying files and folders that don't belong to them. FAT32 does not support file permissions, leaving users free to view,modify, or delete each other's files.
Why your HP LASER P2015 printer is not printing any page except test page and giving admin error?
Try updating the driver. Or have a look on the maker's website for instructions. hp laser p2015 driver download
A LAN driver, or a network card driver enables the operating system to communicate with the network card and transmit and receive packets of information across the network or LAN. It provides a "bridge" between the operating system (software) and the network card (hardware). This kind of layering provides a scalable architecture, where a single operating system can work with many network cards and vice-versa.
How do you get Power Chess 98 to play on your windows XP?
Use Virtual PC (download from Microsoft) and the guest operating system is windows 95. While running windows 95 as a guest, Power chess 98 will run on the guest windows 95 virtual PC OS
Can Office 2007 be installed in Windows 2002 professional?
No, Microsoft Office is only compatible with Windows Vista and Windows XP with Service Pack 2 or higher.
How can you create a desktop shortcut in Windows 2000?
right click on the file or folder ->select send to ->desktop (create shortcut) .