It depends. Chemical Engineering is a fascinating subject. As an applied field os study, it requires good physics and mathematics skill. Remeber chemistry knowledge is key also. As any field if you are dedicated to study it, it is possible to succeed. But I advice is there an interest to study the field. Then working hard will determine the achievement.
Engineers use the abbreviation MM to denote million. MMkcal is simply one million kilocalories. This is also commonly abbreviated as Gcal (as in giga calories).
The best branch for B tech is going to be what is more interesting to you. Mechanical Engineering and Aeronautical Engineering seem to be in favor right now, with mechanical in the lead.
It is one of the conditions for pressure vessels engineering calculations according to the ASME Boilers and Pressure Vessels Code. It is calculated by getting the difference between two streams. There are other definitions for mean metal temperature, but this is the simplest.
The construction of a tubular battery consists of 6 main components. These are as follows: Connector bus, Active material, Centering projections, Porous separators, Axial lead current collector, End cap.
engineer is like user and developer of a phone.and technologist is the maker of the phone.
Yes, piperidine derivatives can be used in veterinary drugs. Piperidine derivatives such as fipronil and flumethrin are commonly used in veterinary medicine to treat parasitic infestations in animals. These drugs are effective against fleas, ticks, and other external parasites that can affect both pets and livestock.
The 3 conditions for combustion are:
1. Something flammable like "fuel"
E.g: Wood, petrol, kerosene, alcohol(ethanol), methane, etc.
2. A right temperature to ignite. The fuel must be above a certain temperature, the temperature which something will ignite is the IGNITE POINT
3. It has to have fresh air: Oxygen
Homemade fireworks start with gunpowder. This is a highly dangerous practice and not suggested without proper experience and safety equipment. Gun powder is highly unstable, as are many of the other chemicals used.
The average annual salary for an engineer in the United States is $70,000. Salaries can vary based on location and experience. The low end of the scale is $47,700 and the high end of the scale is $90,340.
Chemical engineering is a branch of engineering (others are electrical engineering, mechanical engineering, nuclear engineering, etc.).
There will always be a demand for civil engineers. Every roadway, bridge, building, and traffic signal will need to be repaired or replaced at some point in the future. Also, there will be demand for the design and construction of new public works as populations grow. Designing and building these works is what civil engineers do and society needs them for this purpose now and in the future.
One barrel (42 gallons) of crude oil, when refined, yields approximately 19.6 gallons of finished motor gasoline. The remainder of the barrel yields distillate fuel oil, residual fuel oil, jet fuel, and other products.
Start with the maximum flow speed (metres per second) for your liquid, then mutiply by the area of the pipe in square metres, the result is maximum volume flow rate in cubic metres per second.
Yes.
PVC stands for Polyvinyl chloride. It is water resistant and so it is waterproof.
It is a synthetic resin prepared by the polymerization of vinyl chloride.
PVC is used to make water pipes, floor sheets and tiles, water proof cartons, rain coats, shower curtains, and many items that need to be protected from water and fire.
It is also flame resistant. Chlorine is released when you burn PVC, and chlorine atoms inhibit combustion.
A simulation in SimSci Pro/II simulator using the NTRL Liquid Activity method at 14.696 psia for 1-chloro-2,3-epoxypropane (epichlorohydrin) and water indicates that they do not. The T-x-y diagram and equilibrium x-y diagrams do not show an azetrope forming at any point. As a side note these two chemicals should be insoluble in one another so you would not generally expect an azeotrope to form. See the link for an image of the equilibrium graphs.
That is called boiling.
And it is something you can see and observe, but it is something tht is chemically relted and so it is a chemical change.
Function - It adds the pressure to the feed water before it entyers into boiler feed pump suction
Advantage - Ensures high margin NPSH A for boiler feed pump spinning at high rpm (5250Rpm)
Drive for booster - Normally @1450 rpm
Type of impeller- Mostly preferred Double suction
Venturimeter is the short pipe having two conical parts and portion of uniform cross section between these two parts.
process is a set of operation for example in a sugar mill the processing involve
1. bringing out juice from sugarcane.
2. heat them.
3.refine them.etc.
here process is the combination of all of the above stated tasks (1,2,3,).
on the contrary, each of the tasks of a process is operation for example the task
1,2,3, each are operation.
The difference between impulse and reaction turbine goes here...... 1) In case of an impulse turbine the pressure remains same in the rotor or runners, but in case of reaction turbine the pressure decreases in runners as well as stators also. 2) In case of impulse turbine the pressure drop happens only in the nozzle part by means of its kinetic energy. In case of Reaction one the stators those are fixed to the diaphragm act as a nozzle.
It is common practice to specify the pump suction line one size larger than the pump discharge line in order to increase the Net Positive Suction Head available (NPSHA) to the pump. A smaller suction line the same pipe size as the discharge line would result in more pressure drop in the suction line and reduce the amount of head available to the suction side of the pump. This in turn would result in an operating point closer to cavitation of the pump.