Press & hold the AMB button, then while holding the AMB button in press the Temp down button for at least 3 seconds and display will change.
You can not. you have to change the whole cluster.
Celsius
0 degrees Celsius is equivalent to 273 degrees Kelvin. an increase of 1 degree Celsius is equal to an increase of 1 degree Kelvin. Therefore they will never display the same reading.
Press and hold the recirculation button. Then press the temperature up ("+") button to switch between degrees Celsius & Fahrenheit on the Climate Control Temperature and Instrument Panel Outside Temperature displays.
Press and hold the "Refrigerator" and "Freezer" buttons simultaneously for 5 seconds.
Could it be the display has been set to Celsius?The Owners Manual has the instructions on switching the display to read FahrenheitSee "Related Questions" below for more
to change the celsius on display to Fahrenheit, u want to press the econ button on your climatronic, then right after press your auto button right above the econ button, at this time the display should switch to Fahrenheit or Fahrenheit to celcius whichever u prefer....hopes this helps..
The C stands for Celsius, the metric equivalent of Fahrenheit, which is the temperature scale used in the US. In my 2001 Blazer, the compass/temp display is part of the overhead. Next to the display, there are two push-buttons. One turns the display on and off, and the other toggles between Celsius and Fahrenheit. Just hit that button and it should go away. Hope this helps you out. -Rex
Hope this helps. On 1999 model beetle, with key on push and hold in hour and minute buttons at same time this will change your temp from Celsius to Fahrenheit.
To change the temp display from F to C or vice versa (like when the battery is disconnected) you press the Temp down arrow & the Amb buttons for about 5 seconds. Then the display will change. Hope you still need this & it helps. Happy New Year, CT Toolman.
The variable, X, has to undergo the following: X*9÷5+32 [The reverse would be to accept a Fahrenheit temperature: (F-32)*5÷9]
If you have a car with automatic climate control, you can change the temperature display from Fahrenheit to Celsius (and back again): pre-2004: Hold down the "Auto" button for a few seconds.2004 onward: Press the AC button (2nd from top left) and the footwell fan button (lower right) together.