There are actually two bulbs to replace. One under each of two separate lens covers. Undo the screws and gently pry off the lens cover. There is a rubber gasket that can be sticky. Easily done with the door part way up. Twist out the bulbs and replace.
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
in back above liscense plate,there should be 2 screws undo these screws, and pull out assembly to change bulb.
How do you change the lamp on the license plate of a lincoln ls 2000?
I would check the fuses.
The license plate lights are located just above the license plate. Open the tail gate part way to make removal easier (unless you enjoy squatting). Remove the Phillips screws and replace the affected bulb.
how do you change the light bulb over the license plate on 2000 eclipse
No. The licence plate cannot be altered.
There are two housings above the plate all you need is a Phillips head screw driver remove the 4 bolts and change the bulbs it's that easy
The light is built into the bumper on that car. Just above the plate.
how do you change the rear license plate light on a 1999 Buick Regal
how to change 2005 equinox license plate light i removed the screws but it didn't release
How do I change the license plate bulb on a 1993 Lexus ES 300