The simple answer is you don't. Most advance auto parts or some other large auto parts chain stores have loaner tools. Stop in one and ask they may have a puller.
you need a steering wheel puller to get it off.
Take the nut of the steering wheel under the horn and use a puller to get it off
Pull the center horn mechanism, remove the single large nut in the center, connect a steering wheel puller to the 3 (sometimes 2) threaded holes around the center of the steering wheel splined hub and use the puller to loosen the wheel. It won't come off without a puller. Don't even bother to try.
Remove horn ring or button (twist to remove) Remove center bolt on steering wheel Mark location of wheel in relation to steering column shaft for proper re-install Get and attach a steering wheel puller Tighten nut on wheel puller until steering wheel "pops" off
i think this one is simple if you dont have a puller for the job you should not be trying very dumb since the old cars are the easiest to work on once you take the horn ring off and the big nut off the shaft you'll need a wheel puller to pull the wheel off.
take horn cap off the center of the steering wheel and you will see large nut holding the wheel to the spindle, loosen nut and then you will need a wheel puller, install puller and tighten the nut down on the puller until the steering wheel frees itself from the spindle and your done.
You need to have a pulling tool like a steering wheel puller or a t-type puller.
If I remember correctly, there are a several bolts that come off, but then you need a steering wheel puller.
pull the center pad off the wheel and then take the nut off that holds the wheel on and then get a steering wheel puller and hook it up and pull the wheel off the splines.
You have broken wires in the tilt wheel. You will need to take the steering wheel off and start looking for a broken wire in the steering column somewhere. You will have to have a steering wheel puller to get it off.
Pop the horn button off. Under that is the larger nut that holds the wheel in place. Afte that is removed, use a steering wheel puller to remove the wheel.
take horn button off of the steering wheel and you will see a large nut holding the wheel on, take the nut off and then you will need a steering wheel puller to get the wheel off it's splines.