If none of the dash lights are working, it won't be your problem. But, You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
If you Haven't gotten this done yet There are 3 screws at the top of the Dash trim you have to remove. then you will also have to remove the knobs from your headlight and wiper switches. Then pull the dash Bezel out with a slight twist to move it over the steering column you then need to remove the 4 screws that hold the Instrument cluster in. once there out on the left side reach behind the cluster and push up on the plastic speedo cable connecter and then pull it out carefully you than can get acces to all the bulb locations they are behind black twist knobs your bulbs are 192.
with a hammer
you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights
How to replace intrument panel lights on 2002 cadillac escalade
remove plastic around instrument panel . remove screws from instrument panel then pull panel towards you to unplug it this will allow to get to dach lights
Remove the instrument panel plastic cover. Remove the back cover of the instrument panel. The instrument panel lights will be visible and can be accessed.
You need to remove the dash in order to get back there to replace any blown bulbs.
instrument panel or controls?
To replace the dashboard lights on the 1997 F-150, you will first need to remove the dash bezel and dash cover in order to access the lights. Then, remove the instrument panel cover below the bezel and remove the burned out lights. Replace the lights and add the cover, dash cover, and bezel back to the dashboard.
Remove center stack bezel (radio, heater control), remove screws from instrument trim panel at ctr stack and remove instrument trim panel, remove dash top panel, replace speakers.
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
Remove the instrument panel cover. Remove the instrument panel retaining screws. Remove the wiring harness from the gauges. The instrument panel will come out.
All the lights a flashing on the instrument panel on my Chrysler town and country minivan. Why?