if there are no screws of any kind to sto snap it of carefully.
I have a Mazda 929 1990. If you are wanting to remove the radio to replace with a CD player then all u need to do is remove two bolts from the back. This may sound easy but took me a while because they are hard to reach. For the right screw you can reach looking underneath near the brake pedal. For the other I took off the plastic guard underneath the glove compartment. Once this is done try and pop it out.
According to my brother (who is a mechanic), The stock stereo in the protege requires radio removal tools (2 sets) to remove -- you can get them at just about any parts store. Just carefully remove the molding around the radio, insert the tools all the way and then pull them outward to release the clips. The radio should just slide out.
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.
screwdriver, and then pull hard enough to rip out the wires and then there you have it. the way to remove a stock stereo the theft version
* Remove the ashtray and ashtray holder * Remove the radio and mounting plate screws and lower the radio and unplug the electrical connector and antenna lead then push the radio out of the dashboard
im trying to find out the same thing
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio.-Shocker
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio. and that should do it-Shocker
remove the exterior trim peace that surrounds the outer edges of the radio. Then there should be either two 10mm bolts or four phillip head screws holding the radio in place remove them and gently remove the radio from it slot and then unplug the wire harnesses and antenna in the back of the radio. repeat in reverse to reinstall.
first don't remove your stock stereo if u havn"t already. The radio works with the carscomputer to reset codes and other stuff. you can get an adapter that turns your speaker wire on the back of the radio into left and right channel to hook up to an aftermarket amplifier. then hook up your new speakers and sub woofer to the amp and use the stock radio to get your grove on. or install an after market radio in the glove box or middle console but don't remove the stock radio. get rid of the stock amp not powerful enough.
You have to remove the whole lower panel of the dash with either Alan or torch wrench.
stock speaker size for the mazda b3000 04 is 6x8
29s here, the stock radios are held in by four clips on the side of the radio. you will need special ford radio removal tools which are sold at automotive retail stores. the tool should be metal and be shaped like the letter v or u. after you get these tools you will have to remove the slim black panels along the sides of the radio to reveal the slots for the tool. these panel pop right off why you pry at them. you will then insert the tools (2 per side) until the click or catch. with all four handles inserted pull each side of handles away from the radio (toward the door) and then pull outward. hope this helps