Open up the trunk and pull both of the seat releases. lay both sides of the back seat down and remove the 3 or 4 pins holding the plastic behind the back seat up. after removing this you will have more access to the speakers
First, remove the bottom of the rear seat from the car. There are two plastic levers to pull on the front of it and it comes right out. Remove the seatbelts and there should be 2 more bolts sticking out holding in the seat back. After removing the nuts from these, pick up on the back of the seat to remove it. Make sure to watch out for it catching and you breaking something!!! Now, after it is gone, there are plastic pieces holding the panel on the back dash. Pry these off with a screwdriver and pull the panel down. Be careful because the seat belts run through this and it is easy to break. Hope this helps. If you have any more questions email me at krazyredmoron05@Yahoo.com
The front speakers on a 2000 Pontiac Grand Am are 4x6. The rear speakers on a Pontiac Grand Am are 6x9.
The front door speakers on a 2000 Pontiac Grand Am Se are 4x6. The rear deck speakers are 6x9.
You need to remove the rear seat to access the speakers and remove the covers.
4x6
the speakers are 5-1/4" round.
how do you remove dash from a 2000 Pontiac grand prix se
just remove it
You unscrew the screws
when you remove the back seats on a 2000 Pontiac grand am SE if you look threw the trunk there will be a string that you pull that will fold the seats down and at the bottom there will be two latches to remove seats
just pull on it!
Begin by removing the cover from your rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. The rear speakers will come out.
where are the oxygen sensors on a 2000 Pontiac grand am and how do you change them?