0
How do you replace the crankshaft position sensor on a 93 MX6 V6?
Wiki User
∙ 16y ago
Pop the hood..on the passenger side along the oil dip stick is a 3 prong plug disconnect it<Cut the wheel all the way to the right<look inside the wheelwell<By the crank pulley is a small senor held in place by a 10 mm bolt<Remove the bolt< Turn the senor away From the dipstick tube and pull the wire thru it< Biggest problem is whats next <Getting the sensor thru the bracket its ran thru< You will either have to loosen up the accesories and bracket or cut the plug off and re-feed it thru and then tape up the three wires inside<thecarguy84@live.com
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is speed sensor on mx6?
in the transmission
How do you replace the ignition distributor on a 93 mx6 v6?
How do you replace the ignition distributor on a 93 mx6 v6 pics?
Your speedometer wont read on your Mazda mx6 what sensor do you need?
VSS ( Vehical Speed Sensor ) located on your transmission
Where is the iat sensor located in a 93 mx6?
it is located in side the maf actually they use the same sensor housing.
How do you replace fuel injectors 1990 Mazda mx6?
Take out the old ones and replace them with new ones.
Where is the crank sensor Mazda mx6 2.5?
its under crank shaft hub. hope its helps.
Why does the 4wheel abs light on mx6 dashboard come on?
If the abs light on a 4 wheel MX6 dashboard comes on, it is due to faulty abs sensor. It may also be due to a faulty rotor.
What is the cost to replace a CV Joint in a 1994 Mazda MX6?
afew bucks pretty cheap price it out and it will surprise you...
Where is oxygen sensor bank 2 sensor 1 on a 97 Mazda mx6?
I don't know. I'm just navigating. There are only 2 O2 sensors on a 97 MX6. the first one is rigth off the headers in the front of your car (should see a little wire going to it) 2nd is right after the catalic converter underneath the car
Witch parts do you replace in manual transmission when it brakes in a 93 4 cil Mazda mx6?
How long is a piece of string ????
How do you replace the ball joints in a 1990 Ford Probe?
This is not an easy job to do yourself if you only have little knowlege. Get the Haynes Manual MAZDA 626 & MX6 FORD PROBE 1993_2001. No. 61042 This will tell you in detail how to remove & replace the balljoints . This is not an easy job to do yourself if you only have little knowlege. Get the Haynes Manual MAZDA 626 & MX6 FORD PROBE 1993_2001. No. 61042 This will tell you in detail how to remove & replace the balljoints . This is not an easy job to do yourself if you only have little knowlege. Get the Haynes Manual MAZDA 626 & MX6 FORD PROBE 1993_2001. No. 61042 This will tell you in detail how to remove & replace the balljoints .
How do you replace the oil pressure switch for 1995 Mazda MX6?
Hi there , I have just changed the pressure sensor switch on my MX6 , it is located fairly centrally on the engine facing the radiator.There is a small wire that is routed across the alternator so it can be found by tracing that .I had to change the alternator and broke this by accident , you might have to remove the alternator to get to it first depending on the size of your hands and arms ,Mazda has the replacement parts and can be bought for a few pounds .Hope its helpful !!
