Remove the water from your 1987 Nissan pickup truck cooling system. Remove the water supply hose. Remove the water return hose. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
To replace the thermostat on a 1987 Nissan pickup, drain the radiator. Locate the thermostat which is under the top hose assembly, and remove the screws holding it in place. Put the new one in position and refill the radiator.
go to autozone and get a haynes repair manual,it will show you everything.
if your 1987 Nissan pickup leak water from manifold what do we do
yes, see toms z31.com
replace 1987 dodge pickup/power window motor
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
The 3.0 liter V6 in a 1987 Nissan Pickup is an interference engine
on your clutch pedal
no they changed in 88.
above the oil filter,to the left.
On the harmonic balacer
On a 1987 Nissan Hardbody Pickup, the PCV valve is located between the alternator and the oil filter. The valve can be seen when the oil filter has been removed.
1987 NISSAN/DATSUN PICKUP 3.0L 6-cyl EngineCAPACITIESAutomatic Transmission, Total Fill2wd ..........7.4 quarts4wd ..........9.0 quarts 1987 NISSAN/DATSUN PICKUP 2.4L 4-cyl EngineCAPACITIESAutomatic Transmission, Total Fill..........7.4 quarts Hope This Helps.
is it a 4x4? or 2wd?
Appx. 3100 lbs
15 7/8 gallons
Disconnect the low pressure line
1040 KG EMPTY 2450 LOADED
follow your exhaust from your exhaust manifold and you will find.
maybe ablown head gasket