How do you reset change oil indecator for caprice 2006?
When warning lights go off on a car, it means that there is a problem to fix. To reset the lights, one must fix the problem, or they can use a scanner to reset it.
Turn the ignition on but don't start the car, press the accelerator rapidly 3 times in less than 5 seconds, if you do it correctly, the change oil light will be reset, if it does not work, try it again until it does. I have used this on both of my wife's lumina's (both a '98, and a 2000) as well as my '96 Caprice.
How do I reset the service engine light on a 2003 Chevy Trailblazer?
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
How do you reset check engine light for the 2009 Chevy trail blazer?
Reset the change oil light on Mazda 3
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
how do you reset change the oil light in a 2004 alero?
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
turn the key to the on position engine not running step on gas pedal to the floor three times and wait for light to flash and go out and its reset
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
try a local parts store some of them read the codes for free and will reset them for you otherwise you have to take it to a garage.
disconnect the battery for five minutes, It will reset
The reset ranch light with the oil can on a Chevy C 5500 is a warning to check the oil. It can also mean that the oil needs to be changed.
key on engine off press accelerator pedal to the floor five times very rapidly should reset
Fix the cause of the light coming on and the light will reset itself within a few drive cycles.
AnswerIgnition on - engine off - floor the gas pedal 3 times. That's it!
Listed in detail in your owner's manual. Don't have one then you need to get one.
Disconet the battery for 15 minutes this will reset your oil change light
== == how do you reset the oil light on a1992 corvette