I don't know if different years have different specifications but here are the numbers I have for my kodiak 400. I think it is a 2006
Valve clearance (cold):
Intake:
0.06 ~ 0.10 mm
(0.0024 ~ 0.0039 in)
Exhaust:
0.16 ~ 0.20 mm
(0.0063 ~ 0.0079 in)
To do a valve lash on a 2003 Honda Accord make sure a lash gauge is on hand. Valves lashes adjust the valve to piston clearance on cars. Be sure to use the appropriate specifications of clearance for the 2003 Accord.
.004 to .006 in. on the intake and .006 to.008 in. on the exhaust
Intake valves are set at 4 thousandths and exhaust set at 6 thousandths.
Valve lash specs on the H Farmall 1942 Serial number 106300 refer to the tune up specifications for that particular tractor. On some varieties, the point gap is .020 and on some the timing mark is on MP.
I want to know the number for the valve lash adjustment.
What is the valve lash on a cummins engine 16 V
The valve lash settings, on your Caterpillar C9 diesel engine, should be set to .007. The valve lash may be slightly different depending upon the age and where of the valves.
Intake: 0.10-0.15 mm (0.0039-0.0059 in) Exhaust: 0.15-0.20 mm (0.0059-0.0079 in) ....COLD
Exhaust coming out of the airfilter indicates a possibility of a few things. Motor has jumped time. Burnt Intake Valve It can also be that the valve lash is out of adjustment.
0.o5-0.09mm or o.oo2-0.004 intake and 0.004-.006 exhaust or 0.11-o.15mm
valve lash should be set at 30 thou
Valve lash is the gap between the rocker arm and valve stem on cylinder heads. Proper adjustment ensures that a vehicle operates at peak performance.